Your best bet is a ModXo or OpenXenium modchip and SPI2PAR for an old parallel LCD.
EqUiNoX recently added direct SMbus to i2c display support into XBMC. So if you have a more modern i2c display it should work right off the motherboard's LPC header. No modchip needed.
EqUiNoX recently added direct SMbus to i2c display support into XBMC. So if you have a more modern i2c display it should work right off the motherboard's LPC header. No modchip needed.
January 1, 2025 at 12:20 PM
Your best bet is a ModXo or OpenXenium modchip and SPI2PAR for an old parallel LCD.
EqUiNoX recently added direct SMbus to i2c display support into XBMC. So if you have a more modern i2c display it should work right off the motherboard's LPC header. No modchip needed.
EqUiNoX recently added direct SMbus to i2c display support into XBMC. So if you have a more modern i2c display it should work right off the motherboard's LPC header. No modchip needed.
ok on top of the og xbox en route, and waiting for shipping info on the duke, got a set of component cables, an rp2040 zero, & controller breakaway off ebay, and the modxo adaptor for the zero on order from @modzvilleusa.bsky.social
vibrating through the floor in anticipation.
vibrating through the floor in anticipation.
Modxo Adapter for Rp2040 Tiny
This listing is for the Modxo carrier board for the rp2040-tiny. It will work with rp2040-zero as well if installed with pinheaders. Designed for and tested with PrometheOS and Modxo 1.0 firmware Ple...
modzvilleusa.com
March 10, 2025 at 5:51 PM
ok on top of the og xbox en route, and waiting for shipping info on the duke, got a set of component cables, an rp2040 zero, & controller breakaway off ebay, and the modxo adaptor for the zero on order from @modzvilleusa.bsky.social
vibrating through the floor in anticipation.
vibrating through the floor in anticipation.
yooo modxo carrier board spotted
May 9, 2025 at 11:57 PM
yooo modxo carrier board spotted
ordered an lpc rebuild board and additional RAM for my original xbox, now i just gotta buy a modxo carrier board (since i've got a few rp2040s already) and some replacement capacitors so i can sit down eventually and give this thang the 5 star hardmod treatment
March 30, 2025 at 9:38 AM
ordered an lpc rebuild board and additional RAM for my original xbox, now i just gotta buy a modxo carrier board (since i've got a few rp2040s already) and some replacement capacitors so i can sit down eventually and give this thang the 5 star hardmod treatment
You can also buy one that has already been made. I do sell the TopVint ModXo mochip in my shop, which I created using @modzvilleusa.bsky.social PCB design and I assemble myself.
topvint.co.uk/product/og-x...
topvint.co.uk/product/og-x...
OG Xbox Topvint ModXo modchip - Topvint
Raspberry Pi-based Original Xbox modchip, built using ModzvilleUSA design and populated with an RP2040-Zero ModXo is a firmware that takes advantage of the OG Xbox LPC port and the flexibility of the ...
topvint.co.uk
November 23, 2024 at 8:47 AM
You can also buy one that has already been made. I do sell the TopVint ModXo mochip in my shop, which I created using @modzvilleusa.bsky.social PCB design and I assemble myself.
topvint.co.uk/product/og-x...
topvint.co.uk/product/og-x...
Got my Xbox finally working with the ModXo, testing it out with Links golf. It lets you set an audio nickname that the commentators will use for you and there are soooooo many choice ones. How annoying would Daddy get after awhile do you think? Or will it remain funny the whole time...
June 6, 2025 at 3:53 PM
Got my Xbox finally working with the ModXo, testing it out with Links golf. It lets you set an audio nickname that the commentators will use for you and there are soooooo many choice ones. How annoying would Daddy get after awhile do you think? Or will it remain funny the whole time...
Now that the Sega Nomad is alive and well... No rest and on to the next!
1.6 Xbox in for a full recap, cleaning, drive refurb, ModXO Modchip install and SSD upgrade! Shell already off and washed
1.6 Xbox in for a full recap, cleaning, drive refurb, ModXO Modchip install and SSD upgrade! Shell already off and washed
September 2, 2025 at 6:52 PM
Now that the Sega Nomad is alive and well... No rest and on to the next!
1.6 Xbox in for a full recap, cleaning, drive refurb, ModXO Modchip install and SSD upgrade! Shell already off and washed
1.6 Xbox in for a full recap, cleaning, drive refurb, ModXO Modchip install and SSD upgrade! Shell already off and washed
Order 6020 Complete!
Customer sent in an original XBOX revision 1.6 for some mods and PM work
ModXO chip installed (LPC rebuilt), 1TB SSD and StarTech adapter/IDE ribbon
Also did full recap, new DVD belt, cleaning, paste, etc!
Thread
🧵1/4
Customer sent in an original XBOX revision 1.6 for some mods and PM work
ModXO chip installed (LPC rebuilt), 1TB SSD and StarTech adapter/IDE ribbon
Also did full recap, new DVD belt, cleaning, paste, etc!
Thread
🧵1/4
September 5, 2025 at 1:16 PM
Order 6020 Complete!
Customer sent in an original XBOX revision 1.6 for some mods and PM work
ModXO chip installed (LPC rebuilt), 1TB SSD and StarTech adapter/IDE ribbon
Also did full recap, new DVD belt, cleaning, paste, etc!
Thread
🧵1/4
Customer sent in an original XBOX revision 1.6 for some mods and PM work
ModXO chip installed (LPC rebuilt), 1TB SSD and StarTech adapter/IDE ribbon
Also did full recap, new DVD belt, cleaning, paste, etc!
Thread
🧵1/4
With a Cerbios Flash you can use Drives with up to 16TB.
There are some good inexpensive internal HDMI solutions that should even help you squeeze out DTS.
If you look for a decent modchip, look for a ModXo and flash to it PrometheOS.
As a dashboard look for XBMC4Gamers or UIX Lite.
There are some good inexpensive internal HDMI solutions that should even help you squeeze out DTS.
If you look for a decent modchip, look for a ModXo and flash to it PrometheOS.
As a dashboard look for XBMC4Gamers or UIX Lite.
September 23, 2025 at 6:47 AM
With a Cerbios Flash you can use Drives with up to 16TB.
There are some good inexpensive internal HDMI solutions that should even help you squeeze out DTS.
If you look for a decent modchip, look for a ModXo and flash to it PrometheOS.
As a dashboard look for XBMC4Gamers or UIX Lite.
There are some good inexpensive internal HDMI solutions that should even help you squeeze out DTS.
If you look for a decent modchip, look for a ModXo and flash to it PrometheOS.
As a dashboard look for XBMC4Gamers or UIX Lite.
If you have been following the #OGxbox scene, you would have probably heard about ModXo, a #raspberrypi based modchip. ModXo has been covered by Macho Nacho & others.
I am now offering my own build of ModXo through my website, using @modzvilleusa.bsky.social design. Check it out at topvint.co.uk!
I am now offering my own build of ModXo through my website, using @modzvilleusa.bsky.social design. Check it out at topvint.co.uk!
October 28, 2024 at 1:26 PM
If you have been following the #OGxbox scene, you would have probably heard about ModXo, a #raspberrypi based modchip. ModXo has been covered by Macho Nacho & others.
I am now offering my own build of ModXo through my website, using @modzvilleusa.bsky.social design. Check it out at topvint.co.uk!
I am now offering my own build of ModXo through my website, using @modzvilleusa.bsky.social design. Check it out at topvint.co.uk!
ecksbawks.
too impatient to wait on the modxo chip, will set that up later. could just tsop the bitch now but eh. i'm already gonna have to rip it open to solder the chip in, may as well leave it be.
too impatient to wait on the modxo chip, will set that up later. could just tsop the bitch now but eh. i'm already gonna have to rip it open to solder the chip in, may as well leave it be.
March 18, 2025 at 12:14 AM
ecksbawks.
too impatient to wait on the modxo chip, will set that up later. could just tsop the bitch now but eh. i'm already gonna have to rip it open to solder the chip in, may as well leave it be.
too impatient to wait on the modxo chip, will set that up later. could just tsop the bitch now but eh. i'm already gonna have to rip it open to solder the chip in, may as well leave it be.
There is a new open source OG xbox mod using a pico called modxo, I don't know much about it though.
Switch is easy if you have an early switch, very hard if you need a modchip.
You can replace almost everything in a dreamcast easily and cheaply.
Ps1 - xstation is where its at.
Switch is easy if you have an early switch, very hard if you need a modchip.
You can replace almost everything in a dreamcast easily and cheaply.
Ps1 - xstation is where its at.
November 20, 2024 at 2:47 PM
There is a new open source OG xbox mod using a pico called modxo, I don't know much about it though.
Switch is easy if you have an early switch, very hard if you need a modchip.
You can replace almost everything in a dreamcast easily and cheaply.
Ps1 - xstation is where its at.
Switch is easy if you have an early switch, very hard if you need a modchip.
You can replace almost everything in a dreamcast easily and cheaply.
Ps1 - xstation is where its at.
But the best feature of the ModXO is that it is based on the well known RP2040 microcontroller platform, and the firmware is open sourced, making it pretty future proof! For example, you can run the #PrometheOS BIOS, which starts a web server for futher customisation, all running in your modchip!
November 23, 2024 at 8:47 AM
But the best feature of the ModXO is that it is based on the well known RP2040 microcontroller platform, and the firmware is open sourced, making it pretty future proof! For example, you can run the #PrometheOS BIOS, which starts a web server for futher customisation, all running in your modchip!
oh thank god it works i'm down to the last inch and a half of solder at this point.
March 19, 2025 at 5:55 PM
oh thank god it works i'm down to the last inch and a half of solder at this point.
oh lmao i got the last one?
anyway it's on github if you want to get one from pcbway or jlpcb or whatever.
github.com/modzvilleusa...
anyway it's on github if you want to get one from pcbway or jlpcb or whatever.
github.com/modzvilleusa...
March 19, 2025 at 11:27 PM
oh lmao i got the last one?
anyway it's on github if you want to get one from pcbway or jlpcb or whatever.
github.com/modzvilleusa...
anyway it's on github if you want to get one from pcbway or jlpcb or whatever.
github.com/modzvilleusa...
Just getting to the Motherboard for a Modchip. #ConsoleMods #Modding #Hack #eWaste #Modding #RetroTech #Tech #Vintage #Modchip #Soldering #ConsoleModding #Console #ModXo #RetroGaming #Gaming #RetroConsole #RetroModding #ConsoleRepair #DIY #Electronics #XboxScene #Homebrew #UnleashX #Cerbios #Xbox
September 26, 2025 at 5:02 PM
Just getting to the Motherboard for a Modchip. #ConsoleMods #Modding #Hack #eWaste #Modding #RetroTech #Tech #Vintage #Modchip #Soldering #ConsoleModding #Console #ModXo #RetroGaming #Gaming #RetroConsole #RetroModding #ConsoleRepair #DIY #Electronics #XboxScene #Homebrew #UnleashX #Cerbios #Xbox
What can you do with an #OGXbox with a #ModXO modchip? For starters, the same things you can do with many other modchips such as Open Xenium or Aladdin, such as running different BIOSes, playing region-free games from the HDD, conect remotely via FTP, run homebrew and emulators, different dashes...
November 23, 2024 at 8:47 AM
I'm starting my dive into Xbox Homebrew.
youtu.be/bfYNjwlHETA
#eWaste #Tech #Vintage #Analog #Retro #OriginalXbox #Modchip #XboxModding #OGXbox #Soldering #ConsoleModding #Console #Xbox #ModXo #XboxRepair #RetroGaming #Gaming #RetroConsole #RetroModding #XboxScene #Homebrew #UnleashX #Cerbios
youtu.be/bfYNjwlHETA
#eWaste #Tech #Vintage #Analog #Retro #OriginalXbox #Modchip #XboxModding #OGXbox #Soldering #ConsoleModding #Console #Xbox #ModXo #XboxRepair #RetroGaming #Gaming #RetroConsole #RetroModding #XboxScene #Homebrew #UnleashX #Cerbios
Installing My First Xbox Mod Chip - ModXo
youtu.be
September 25, 2025 at 5:01 PM
I'm starting my dive into Xbox Homebrew.
youtu.be/bfYNjwlHETA
#eWaste #Tech #Vintage #Analog #Retro #OriginalXbox #Modchip #XboxModding #OGXbox #Soldering #ConsoleModding #Console #Xbox #ModXo #XboxRepair #RetroGaming #Gaming #RetroConsole #RetroModding #XboxScene #Homebrew #UnleashX #Cerbios
youtu.be/bfYNjwlHETA
#eWaste #Tech #Vintage #Analog #Retro #OriginalXbox #Modchip #XboxModding #OGXbox #Soldering #ConsoleModding #Console #Xbox #ModXo #XboxRepair #RetroGaming #Gaming #RetroConsole #RetroModding #XboxScene #Homebrew #UnleashX #Cerbios
Oh OK, not sure why I thought those components might be surface mounted 😁 I guess I was thinking about the type of connectors I used in the ModXO, where I couldn't really solder the anchor points with just an iron.
In any case, thanks again and looking forward to test both those things!
In any case, thanks again and looking forward to test both those things!
November 26, 2024 at 8:02 AM
Oh OK, not sure why I thought those components might be surface mounted 😁 I guess I was thinking about the type of connectors I used in the ModXO, where I couldn't really solder the anchor points with just an iron.
In any case, thanks again and looking forward to test both those things!
In any case, thanks again and looking forward to test both those things!
How can you get a #ModXO modchip? Well, you can make one yourself! The Team Resurgent website includes instructions on how to do this, as well as how to flash a Raspberry Pi with the current firmware.
November 23, 2024 at 8:47 AM
How can you get a #ModXO modchip? Well, you can make one yourself! The Team Resurgent website includes instructions on how to do this, as well as how to flash a Raspberry Pi with the current firmware.
Currently building my own #modxo modchip now that I received my PCB design from the fab. I wanted most barebone carrier board as possible. Such a fun experience from start to finish.
March 7, 2025 at 11:16 PM
Currently building my own #modxo modchip now that I received my PCB design from the fab. I wanted most barebone carrier board as possible. Such a fun experience from start to finish.
Well, I didn't design these #OGxbox ModXO PCBs (@modzvilleusa.bsky.social did), but I ordered and assembled them, which is an achievement for me 😅. They work great, too
November 11, 2024 at 12:54 PM
Well, I didn't design these #OGxbox ModXO PCBs (@modzvilleusa.bsky.social did), but I ordered and assembled them, which is an achievement for me 😅. They work great, too
i was curious about stencils i shoulda customized the size lmao
March 11, 2025 at 6:40 PM
i was curious about stencils i shoulda customized the size lmao
resisting the urge to place lcsc/jlcpcb order again for the picopromsd (og xbox eeprom reader). my modxo carrier board pcbs are coming in today and i should be patient.
March 11, 2025 at 2:20 PM
resisting the urge to place lcsc/jlcpcb order again for the picopromsd (og xbox eeprom reader). my modxo carrier board pcbs are coming in today and i should be patient.
open source lpc device emulator for the original xbox called Modxo (pronounced modsho, linked in embed), running PrometheOS which lets me directly format and ftp files into a new drive, as well as being able to run the bios of most modchips, attached through an adaptor by @modzvilleusa.bsky.social
GitHub - Team-Resurgent/Modxo
Contribute to Team-Resurgent/Modxo development by creating an account on GitHub.
github.com
March 19, 2025 at 7:56 PM
open source lpc device emulator for the original xbox called Modxo (pronounced modsho, linked in embed), running PrometheOS which lets me directly format and ftp files into a new drive, as well as being able to run the bios of most modchips, attached through an adaptor by @modzvilleusa.bsky.social