HotGun
@hotgun3d.com
Needed a quick shoe horn for my son’s football boots ⚽
Lovely print, but I should’ve shot it vertically — my A1 Mini’s rising print head pushes the object up out of frame. Still got so much to learn! 😅
#3DPrinting #BambuLab
Lovely print, but I should’ve shot it vertically — my A1 Mini’s rising print head pushes the object up out of frame. Still got so much to learn! 😅
#3DPrinting #BambuLab
November 9, 2025 at 9:31 AM
Needed a quick shoe horn for my son’s football boots ⚽
Lovely print, but I should’ve shot it vertically — my A1 Mini’s rising print head pushes the object up out of frame. Still got so much to learn! 😅
#3DPrinting #BambuLab
Lovely print, but I should’ve shot it vertically — my A1 Mini’s rising print head pushes the object up out of frame. Still got so much to learn! 😅
#3DPrinting #BambuLab
Unedited timelapse:
Chunky latch for my Gridfinity pred cases.
Focus was slightly off again (and lighting too 😅). Every print I'm a step closer to mastering the focus and lighting.
But the model? Super satisfying click!
Download model 👇
#Gridfinity #3DPrinting #BambuLab
Chunky latch for my Gridfinity pred cases.
Focus was slightly off again (and lighting too 😅). Every print I'm a step closer to mastering the focus and lighting.
But the model? Super satisfying click!
Download model 👇
#Gridfinity #3DPrinting #BambuLab
November 8, 2025 at 9:05 AM
Unedited timelapse:
Chunky latch for my Gridfinity pred cases.
Focus was slightly off again (and lighting too 😅). Every print I'm a step closer to mastering the focus and lighting.
But the model? Super satisfying click!
Download model 👇
#Gridfinity #3DPrinting #BambuLab
Chunky latch for my Gridfinity pred cases.
Focus was slightly off again (and lighting too 😅). Every print I'm a step closer to mastering the focus and lighting.
But the model? Super satisfying click!
Download model 👇
#Gridfinity #3DPrinting #BambuLab
Unedited timelapse.
Testing a thicker nozzle on this 1x1 bin. Trying to reduce print time without losing quality.
Chasing the sweet spot between speed and detail. The difference in surface texture is subtle, but it's there.
#Gridfinity #3DPrinting #BambuLab
Testing a thicker nozzle on this 1x1 bin. Trying to reduce print time without losing quality.
Chasing the sweet spot between speed and detail. The difference in surface texture is subtle, but it's there.
#Gridfinity #3DPrinting #BambuLab
November 7, 2025 at 8:05 AM
Unedited timelapse.
Testing a thicker nozzle on this 1x1 bin. Trying to reduce print time without losing quality.
Chasing the sweet spot between speed and detail. The difference in surface texture is subtle, but it's there.
#Gridfinity #3DPrinting #BambuLab
Testing a thicker nozzle on this 1x1 bin. Trying to reduce print time without losing quality.
Chasing the sweet spot between speed and detail. The difference in surface texture is subtle, but it's there.
#Gridfinity #3DPrinting #BambuLab
Unedited timelapse.
Tried a macro lens on this Gridfinity 1x1 square print. Focusing on something that doesn’t exist yet was trickier than expected 😅
Still, it’s wild how satisfying these tiny prints look up close.
#Gridfinity #3DPrinting #BambuLab
Tried a macro lens on this Gridfinity 1x1 square print. Focusing on something that doesn’t exist yet was trickier than expected 😅
Still, it’s wild how satisfying these tiny prints look up close.
#Gridfinity #3DPrinting #BambuLab
November 6, 2025 at 8:26 AM
Unedited timelapse.
Tried a macro lens on this Gridfinity 1x1 square print. Focusing on something that doesn’t exist yet was trickier than expected 😅
Still, it’s wild how satisfying these tiny prints look up close.
#Gridfinity #3DPrinting #BambuLab
Tried a macro lens on this Gridfinity 1x1 square print. Focusing on something that doesn’t exist yet was trickier than expected 😅
Still, it’s wild how satisfying these tiny prints look up close.
#Gridfinity #3DPrinting #BambuLab
I printed a bunch of these spool holders for the IKEA SKADIS peg boards over the weekend.
Time to organise my filament.
Well, time to randomly throw them on a wall, but... that's still progress, right?
makerworld.com/en/models/55...
Time to organise my filament.
Well, time to randomly throw them on a wall, but... that's still progress, right?
makerworld.com/en/models/55...
October 7, 2025 at 7:14 AM
I printed a bunch of these spool holders for the IKEA SKADIS peg boards over the weekend.
Time to organise my filament.
Well, time to randomly throw them on a wall, but... that's still progress, right?
makerworld.com/en/models/55...
Time to organise my filament.
Well, time to randomly throw them on a wall, but... that's still progress, right?
makerworld.com/en/models/55...
This was quite a nice timelapse... but I still need to tweak a few things. I thought using a concentric pattern would result in less "flicker" at the beginning - but no.
Still work to do.
Still work to do.
September 30, 2025 at 7:14 AM
This was quite a nice timelapse... but I still need to tweak a few things. I thought using a concentric pattern would result in less "flicker" at the beginning - but no.
Still work to do.
Still work to do.
One thing I'm trying to improve in my timelapses is how the light bounces off differently orientated layer lines.
The "flashing" at the start of this one is a perfect example.
Check the individual frames 👇
The "flashing" at the start of this one is a perfect example.
Check the individual frames 👇
September 28, 2025 at 4:12 PM
One thing I'm trying to improve in my timelapses is how the light bounces off differently orientated layer lines.
The "flashing" at the start of this one is a perfect example.
Check the individual frames 👇
The "flashing" at the start of this one is a perfect example.
Check the individual frames 👇
My son has been struggling to get his tight football boots on and off:
September 27, 2025 at 7:04 AM
My son has been struggling to get his tight football boots on and off:
Working on so many projects just now and I needed to use an old tripod. But... none of my quick release plates fit! 🤯
Oh, not to worry... we have 3d printers! 🤣 💪
Oh, not to worry... we have 3d printers! 🤣 💪
September 25, 2025 at 9:18 AM
Working on so many projects just now and I needed to use an old tripod. But... none of my quick release plates fit! 🤯
Oh, not to worry... we have 3d printers! 🤣 💪
Oh, not to worry... we have 3d printers! 🤣 💪
Using gridfinity is the best way to organise your IKEA ALEX drawers... it's perfect!
You too can organise your drawers with gridfinity. 3d printing is not as complex as you may think!
#gridfinity #ikea #ikeahack #3dprinting
You too can organise your drawers with gridfinity. 3d printing is not as complex as you may think!
#gridfinity #ikea #ikeahack #3dprinting
September 10, 2025 at 6:49 AM
Using gridfinity is the best way to organise your IKEA ALEX drawers... it's perfect!
You too can organise your drawers with gridfinity. 3d printing is not as complex as you may think!
#gridfinity #ikea #ikeahack #3dprinting
You too can organise your drawers with gridfinity. 3d printing is not as complex as you may think!
#gridfinity #ikea #ikeahack #3dprinting
Simple gridfinity bin for my Anker battery. Stored in my IKEA ALEX drawers.
Anyone can create custom gridfinity bins, particularly for simple objects! 3d printing is not as complex as it first appears.
#gridfinity #ikea #ikeahack #3dprinting
Anyone can create custom gridfinity bins, particularly for simple objects! 3d printing is not as complex as it first appears.
#gridfinity #ikea #ikeahack #3dprinting
September 9, 2025 at 10:56 AM
Simple gridfinity bin for my Anker battery. Stored in my IKEA ALEX drawers.
Anyone can create custom gridfinity bins, particularly for simple objects! 3d printing is not as complex as it first appears.
#gridfinity #ikea #ikeahack #3dprinting
Anyone can create custom gridfinity bins, particularly for simple objects! 3d printing is not as complex as it first appears.
#gridfinity #ikea #ikeahack #3dprinting
September 8, 2025 at 10:41 AM
September 6, 2025 at 8:14 AM
I ordered a new storage box, but it arrived without dividers...
hotgun3d.com/stanley-divi...
#3dprinting #3dmodeling
hotgun3d.com/stanley-divi...
#3dprinting #3dmodeling
September 5, 2025 at 6:14 PM
I ordered a new storage box, but it arrived without dividers...
hotgun3d.com/stanley-divi...
#3dprinting #3dmodeling
hotgun3d.com/stanley-divi...
#3dprinting #3dmodeling
I'm organising all of my storage using gridfinity bins - along with a few custom parts.
If you would like the files so you can print this yourself - let me know!
#3DPrinting #3dmodelling #gridfinity #storage #organization
If you would like the files so you can print this yourself - let me know!
#3DPrinting #3dmodelling #gridfinity #storage #organization
September 5, 2025 at 11:38 AM
I'm organising all of my storage using gridfinity bins - along with a few custom parts.
If you would like the files so you can print this yourself - let me know!
#3DPrinting #3dmodelling #gridfinity #storage #organization
If you would like the files so you can print this yourself - let me know!
#3DPrinting #3dmodelling #gridfinity #storage #organization
I don't do any cosplay myself, these helmets are for the shelf. But, who doesn't love a good Iron Man helmet!?
This face plate is from the helmet I have in progress.
Let me know if you'd be interested in seeing the sanding and prep process...
This face plate is from the helmet I have in progress.
Let me know if you'd be interested in seeing the sanding and prep process...
September 4, 2025 at 2:55 PM
I don't do any cosplay myself, these helmets are for the shelf. But, who doesn't love a good Iron Man helmet!?
This face plate is from the helmet I have in progress.
Let me know if you'd be interested in seeing the sanding and prep process...
This face plate is from the helmet I have in progress.
Let me know if you'd be interested in seeing the sanding and prep process...
September 3, 2025 at 6:18 AM
Would anyone be interested in a full tutorial on how to customise, print and assemble Rugged Gridfinity Boxes?
#3dprinting #gridfinity
#3dprinting #gridfinity
September 2, 2025 at 12:51 PM
Would anyone be interested in a full tutorial on how to customise, print and assemble Rugged Gridfinity Boxes?
#3dprinting #gridfinity
#3dprinting #gridfinity
January 13, 2025 at 9:05 PM