HotGun
@hotgun3d.com
Needed a quick shoe horn for my son’s football boots ⚽
Lovely print, but I should’ve shot it vertically — my A1 Mini’s rising print head pushes the object up out of frame. Still got so much to learn! 😅
#3DPrinting #BambuLab
Lovely print, but I should’ve shot it vertically — my A1 Mini’s rising print head pushes the object up out of frame. Still got so much to learn! 😅
#3DPrinting #BambuLab
November 9, 2025 at 9:31 AM
Needed a quick shoe horn for my son’s football boots ⚽
Lovely print, but I should’ve shot it vertically — my A1 Mini’s rising print head pushes the object up out of frame. Still got so much to learn! 😅
#3DPrinting #BambuLab
Lovely print, but I should’ve shot it vertically — my A1 Mini’s rising print head pushes the object up out of frame. Still got so much to learn! 😅
#3DPrinting #BambuLab
Unedited timelapse:
Chunky latch for my Gridfinity pred cases.
Focus was slightly off again (and lighting too 😅). Every print I'm a step closer to mastering the focus and lighting.
But the model? Super satisfying click!
Download model 👇
#Gridfinity #3DPrinting #BambuLab
Chunky latch for my Gridfinity pred cases.
Focus was slightly off again (and lighting too 😅). Every print I'm a step closer to mastering the focus and lighting.
But the model? Super satisfying click!
Download model 👇
#Gridfinity #3DPrinting #BambuLab
November 8, 2025 at 9:05 AM
Unedited timelapse:
Chunky latch for my Gridfinity pred cases.
Focus was slightly off again (and lighting too 😅). Every print I'm a step closer to mastering the focus and lighting.
But the model? Super satisfying click!
Download model 👇
#Gridfinity #3DPrinting #BambuLab
Chunky latch for my Gridfinity pred cases.
Focus was slightly off again (and lighting too 😅). Every print I'm a step closer to mastering the focus and lighting.
But the model? Super satisfying click!
Download model 👇
#Gridfinity #3DPrinting #BambuLab
Unedited timelapse.
Testing a thicker nozzle on this 1x1 bin. Trying to reduce print time without losing quality.
Chasing the sweet spot between speed and detail. The difference in surface texture is subtle, but it's there.
#Gridfinity #3DPrinting #BambuLab
Testing a thicker nozzle on this 1x1 bin. Trying to reduce print time without losing quality.
Chasing the sweet spot between speed and detail. The difference in surface texture is subtle, but it's there.
#Gridfinity #3DPrinting #BambuLab
November 7, 2025 at 8:05 AM
Unedited timelapse.
Testing a thicker nozzle on this 1x1 bin. Trying to reduce print time without losing quality.
Chasing the sweet spot between speed and detail. The difference in surface texture is subtle, but it's there.
#Gridfinity #3DPrinting #BambuLab
Testing a thicker nozzle on this 1x1 bin. Trying to reduce print time without losing quality.
Chasing the sweet spot between speed and detail. The difference in surface texture is subtle, but it's there.
#Gridfinity #3DPrinting #BambuLab
Reposted by HotGun
November 5, 2025 at 8:15 AM
Unedited timelapse.
Tried a macro lens on this Gridfinity 1x1 square print. Focusing on something that doesn’t exist yet was trickier than expected 😅
Still, it’s wild how satisfying these tiny prints look up close.
#Gridfinity #3DPrinting #BambuLab
Tried a macro lens on this Gridfinity 1x1 square print. Focusing on something that doesn’t exist yet was trickier than expected 😅
Still, it’s wild how satisfying these tiny prints look up close.
#Gridfinity #3DPrinting #BambuLab
November 6, 2025 at 8:26 AM
Unedited timelapse.
Tried a macro lens on this Gridfinity 1x1 square print. Focusing on something that doesn’t exist yet was trickier than expected 😅
Still, it’s wild how satisfying these tiny prints look up close.
#Gridfinity #3DPrinting #BambuLab
Tried a macro lens on this Gridfinity 1x1 square print. Focusing on something that doesn’t exist yet was trickier than expected 😅
Still, it’s wild how satisfying these tiny prints look up close.
#Gridfinity #3DPrinting #BambuLab
Reposted by HotGun
This SanDisk bin from @hotgun3d.com allows you to store 2x SSDs neatly and securely.
Model: makerworld.com/en/models/18...
Drive: amzn.to/41uG6D1
Model: makerworld.com/en/models/18...
Drive: amzn.to/41uG6D1
November 3, 2025 at 8:26 AM
This SanDisk bin from @hotgun3d.com allows you to store 2x SSDs neatly and securely.
Model: makerworld.com/en/models/18...
Drive: amzn.to/41uG6D1
Model: makerworld.com/en/models/18...
Drive: amzn.to/41uG6D1
Reposted by HotGun
Nice idea for adding mouse ears in Bambu Studio:
forum.bambulab.com/t/customizab...
For anyone unaware, this is excellent for bed adhesion. They help greatly to stop the corners of #gridfinity bins from lifting and warping.
forum.bambulab.com/t/customizab...
For anyone unaware, this is excellent for bed adhesion. They help greatly to stop the corners of #gridfinity bins from lifting and warping.
Customizable mouse-ear brim workaround in BambuStudio
Hi Folks, I want just briefly share something usable I have figured out. I missed the Mose-ear feature in BambuStudio. I know it from OrcaSlices and sometimes it’s very usabel. I found a workaround b...
forum.bambulab.com
October 31, 2025 at 4:08 PM
Nice idea for adding mouse ears in Bambu Studio:
forum.bambulab.com/t/customizab...
For anyone unaware, this is excellent for bed adhesion. They help greatly to stop the corners of #gridfinity bins from lifting and warping.
forum.bambulab.com/t/customizab...
For anyone unaware, this is excellent for bed adhesion. They help greatly to stop the corners of #gridfinity bins from lifting and warping.
Reposted by HotGun
Storing pens?
This lid from @hotgun3d.com gives you quick access to 6 of your favourites!
MakerWorld: makerworld.com/en/models/18...
Pens: amzn.to/4lXnO4G
This lid from @hotgun3d.com gives you quick access to 6 of your favourites!
MakerWorld: makerworld.com/en/models/18...
Pens: amzn.to/4lXnO4G
October 30, 2025 at 8:45 AM
Storing pens?
This lid from @hotgun3d.com gives you quick access to 6 of your favourites!
MakerWorld: makerworld.com/en/models/18...
Pens: amzn.to/4lXnO4G
This lid from @hotgun3d.com gives you quick access to 6 of your favourites!
MakerWorld: makerworld.com/en/models/18...
Pens: amzn.to/4lXnO4G
Sorry folks - just noticed I broke the 'download stl' button on the site when swapping a link to MakerWorld.
Issue is fixed. If you tried to download something before and got a 404, please try again.
Issue is fixed. If you tried to download something before and got a 404, please try again.
October 30, 2025 at 7:19 AM
Sorry folks - just noticed I broke the 'download stl' button on the site when swapping a link to MakerWorld.
Issue is fixed. If you tried to download something before and got a 404, please try again.
Issue is fixed. If you tried to download something before and got a 404, please try again.
Reposted by HotGun
We're currently printing this Zip Lock Bag Bin for #gridfinity by @stothed on MakerWorld:
makerworld.com/en/models/11...
makerworld.com/en/models/11...
October 24, 2025 at 6:25 PM
We're currently printing this Zip Lock Bag Bin for #gridfinity by @stothed on MakerWorld:
makerworld.com/en/models/11...
makerworld.com/en/models/11...
I'm starting to share my models on MakerWorld.
This time: simple little #gridfinity bin for 2x SanDisk drives:
makerworld.com/en/models/18...
This time: simple little #gridfinity bin for 2x SanDisk drives:
makerworld.com/en/models/18...
SanDisk Gridfinity Bin by hotgun3d MakerWorld: Download Free 3D Models
This is a custom Gridfinity-compatible 1x3 bin, providing secure housing for two SanDisk Extreme SSD drives. It evolved through multiple design iterations, focusing on a balance of fit, grip, and…
makerworld.com
October 17, 2025 at 8:15 AM
I'm starting to share my models on MakerWorld.
This time: simple little #gridfinity bin for 2x SanDisk drives:
makerworld.com/en/models/18...
This time: simple little #gridfinity bin for 2x SanDisk drives:
makerworld.com/en/models/18...
Achieved my 2025 goal of reaching 1,000 subscribers!
Grateful to everyone. Very much enjoying the journey.
www.youtube.com/@hotgun3d
Grateful to everyone. Very much enjoying the journey.
www.youtube.com/@hotgun3d
October 14, 2025 at 4:44 PM
Achieved my 2025 goal of reaching 1,000 subscribers!
Grateful to everyone. Very much enjoying the journey.
www.youtube.com/@hotgun3d
Grateful to everyone. Very much enjoying the journey.
www.youtube.com/@hotgun3d
Needing to take some good photographs. Planning to print this photo backdrop model:
makerworld.com/en/models/15...
Has anyone printed this one before, or would recommend another?
makerworld.com/en/models/15...
Has anyone printed this one before, or would recommend another?
October 12, 2025 at 1:53 PM
Needing to take some good photographs. Planning to print this photo backdrop model:
makerworld.com/en/models/15...
Has anyone printed this one before, or would recommend another?
makerworld.com/en/models/15...
Has anyone printed this one before, or would recommend another?
I printed a bunch of these spool holders for the IKEA SKADIS peg boards over the weekend.
Time to organise my filament.
Well, time to randomly throw them on a wall, but... that's still progress, right?
makerworld.com/en/models/55...
Time to organise my filament.
Well, time to randomly throw them on a wall, but... that's still progress, right?
makerworld.com/en/models/55...
October 7, 2025 at 7:14 AM
I printed a bunch of these spool holders for the IKEA SKADIS peg boards over the weekend.
Time to organise my filament.
Well, time to randomly throw them on a wall, but... that's still progress, right?
makerworld.com/en/models/55...
Time to organise my filament.
Well, time to randomly throw them on a wall, but... that's still progress, right?
makerworld.com/en/models/55...
This was quite a nice timelapse... but I still need to tweak a few things. I thought using a concentric pattern would result in less "flicker" at the beginning - but no.
Still work to do.
Still work to do.
September 30, 2025 at 7:14 AM
This was quite a nice timelapse... but I still need to tweak a few things. I thought using a concentric pattern would result in less "flicker" at the beginning - but no.
Still work to do.
Still work to do.
One thing I'm trying to improve in my timelapses is how the light bounces off differently orientated layer lines.
The "flashing" at the start of this one is a perfect example.
Check the individual frames 👇
The "flashing" at the start of this one is a perfect example.
Check the individual frames 👇
September 28, 2025 at 4:12 PM
One thing I'm trying to improve in my timelapses is how the light bounces off differently orientated layer lines.
The "flashing" at the start of this one is a perfect example.
Check the individual frames 👇
The "flashing" at the start of this one is a perfect example.
Check the individual frames 👇
I've been asked so many times for the #gridfinity pen lid model. I have tweaks I want to make, but I don't have a lot of time at the moment - so I've decided to upload it anyways if you'd like it:
makerworld.com/en/models/18...
makerworld.com/en/models/18...
September 27, 2025 at 3:19 PM
I've been asked so many times for the #gridfinity pen lid model. I have tweaks I want to make, but I don't have a lot of time at the moment - so I've decided to upload it anyways if you'd like it:
makerworld.com/en/models/18...
makerworld.com/en/models/18...
My son has been struggling to get his tight football boots on and off:
September 27, 2025 at 7:04 AM
My son has been struggling to get his tight football boots on and off:
I was tired of digging through pen bin, so I created a #gridfinity pen lid!
Golds 6 pens on the top of a 2x3 bin for storage underneath.
You can get the model, and learn more about the design iterations, what I'll be tweaking next, and things here 👇
Golds 6 pens on the top of a 2x3 bin for storage underneath.
You can get the model, and learn more about the design iterations, what I'll be tweaking next, and things here 👇
September 26, 2025 at 7:30 AM
I was tired of digging through pen bin, so I created a #gridfinity pen lid!
Golds 6 pens on the top of a 2x3 bin for storage underneath.
You can get the model, and learn more about the design iterations, what I'll be tweaking next, and things here 👇
Golds 6 pens on the top of a 2x3 bin for storage underneath.
You can get the model, and learn more about the design iterations, what I'll be tweaking next, and things here 👇
Working on so many projects just now and I needed to use an old tripod. But... none of my quick release plates fit! 🤯
Oh, not to worry... we have 3d printers! 🤣 💪
Oh, not to worry... we have 3d printers! 🤣 💪
September 25, 2025 at 9:18 AM
Working on so many projects just now and I needed to use an old tripod. But... none of my quick release plates fit! 🤯
Oh, not to worry... we have 3d printers! 🤣 💪
Oh, not to worry... we have 3d printers! 🤣 💪
My little YouTube channel has 888 subscribers. Very satisfying number, and very grateful for everyone! 👋
September 23, 2025 at 8:12 AM
My little YouTube channel has 888 subscribers. Very satisfying number, and very grateful for everyone! 👋
I fixed my washing basket using 3d printing to extend it's life a little longer:
hotgun3d.com/washing-bask...
hotgun3d.com/washing-bask...
September 12, 2025 at 8:35 PM
I fixed my washing basket using 3d printing to extend it's life a little longer:
hotgun3d.com/washing-bask...
hotgun3d.com/washing-bask...
Using gridfinity is the best way to organise your IKEA ALEX drawers... it's perfect!
You too can organise your drawers with gridfinity. 3d printing is not as complex as you may think!
#gridfinity #ikea #ikeahack #3dprinting
You too can organise your drawers with gridfinity. 3d printing is not as complex as you may think!
#gridfinity #ikea #ikeahack #3dprinting
September 10, 2025 at 6:49 AM
Using gridfinity is the best way to organise your IKEA ALEX drawers... it's perfect!
You too can organise your drawers with gridfinity. 3d printing is not as complex as you may think!
#gridfinity #ikea #ikeahack #3dprinting
You too can organise your drawers with gridfinity. 3d printing is not as complex as you may think!
#gridfinity #ikea #ikeahack #3dprinting
Simple gridfinity bin for my Anker battery. Stored in my IKEA ALEX drawers.
Anyone can create custom gridfinity bins, particularly for simple objects! 3d printing is not as complex as it first appears.
#gridfinity #ikea #ikeahack #3dprinting
Anyone can create custom gridfinity bins, particularly for simple objects! 3d printing is not as complex as it first appears.
#gridfinity #ikea #ikeahack #3dprinting
September 9, 2025 at 10:56 AM
Simple gridfinity bin for my Anker battery. Stored in my IKEA ALEX drawers.
Anyone can create custom gridfinity bins, particularly for simple objects! 3d printing is not as complex as it first appears.
#gridfinity #ikea #ikeahack #3dprinting
Anyone can create custom gridfinity bins, particularly for simple objects! 3d printing is not as complex as it first appears.
#gridfinity #ikea #ikeahack #3dprinting