Greg of Laser Bear
@collingall.bsky.social
www.laserbear.net
Founder of Laser Bear Industries, a retro video gaming focused mod manufacturer.
We leverage 3D Printing and Electrical Engineering
Founder of Laser Bear Industries, a retro video gaming focused mod manufacturer.
We leverage 3D Printing and Electrical Engineering
Damn these Noctua NF-A4x10 5v are beautiful in Black with the Brown bumpers. Been a while since we could stock this color way. I need to get the tariff invoice from UPS before I list them I have an idea what that looks like but until I get the final pricing I can't list these for sale.
September 19, 2025 at 2:15 PM
Damn these Noctua NF-A4x10 5v are beautiful in Black with the Brown bumpers. Been a while since we could stock this color way. I need to get the tariff invoice from UPS before I list them I have an idea what that looks like but until I get the final pricing I can't list these for sale.
Getting ready to send off the first test unit for @darthcloud.blueretro.com threw together a test firmware to validate the addressable LEDs since they were a pain to solder. It's so nice to see them shine. #DreamcastBlueRetro
September 18, 2025 at 7:27 PM
Getting ready to send off the first test unit for @darthcloud.blueretro.com threw together a test firmware to validate the addressable LEDs since they were a pain to solder. It's so nice to see them shine. #DreamcastBlueRetro
New Protos today just need to pencil in time to get them assembled today.
#GameCube #LCDJewel #Dreamcast #blueretro
#GameCube #LCDJewel #Dreamcast #blueretro
September 3, 2025 at 2:59 PM
New Protos today just need to pencil in time to get them assembled today.
#GameCube #LCDJewel #Dreamcast #blueretro
#GameCube #LCDJewel #Dreamcast #blueretro
Always love to see the final panels for these projects. #WavePhoenix adapters will start shipping soon, just need to assemble and QC test
June 27, 2025 at 5:13 PM
Always love to see the final panels for these projects. #WavePhoenix adapters will start shipping soon, just need to assemble and QC test
They are so little, looking at Monday 10am CST as the launch for round 1, not a pre-order we will have them in stock and begin shipping when we return from Memorial Day holiday.
Replacement Wavebird Receivers #wavephoenix #gamecube #retrogaming
www.laserbear.net/products/wav...
Replacement Wavebird Receivers #wavephoenix #gamecube #retrogaming
www.laserbear.net/products/wav...
May 22, 2025 at 3:10 PM
They are so little, looking at Monday 10am CST as the launch for round 1, not a pre-order we will have them in stock and begin shipping when we return from Memorial Day holiday.
Replacement Wavebird Receivers #wavephoenix #gamecube #retrogaming
www.laserbear.net/products/wav...
Replacement Wavebird Receivers #wavephoenix #gamecube #retrogaming
www.laserbear.net/products/wav...
I customized mine to be slightly smaller for a custom shell
May 8, 2025 at 7:36 PM
I customized mine to be slightly smaller for a custom shell
It's so little, definitely pushing my soldering skills lol
May 8, 2025 at 6:05 PM
It's so little, definitely pushing my soldering skills lol
We have life on the #wavephoenix Wavebird adapter. Gonna start printing a shell and start the tedious task of crimping the wires for the adapters.
May 8, 2025 at 6:02 PM
We have life on the #wavephoenix Wavebird adapter. Gonna start printing a shell and start the tedious task of crimping the wires for the adapters.
The final bit to validate on the refresh of the RT4k SVideo(enhances)/CVBS adapter. Easy solder free access to the serial port interface, allowing for serial connectivity to external switchers.
Simple JST PH 3pin connector to keep the form factor as small as possible.
Expect restock by Friday.
Simple JST PH 3pin connector to keep the form factor as small as possible.
Expect restock by Friday.
April 1, 2025 at 7:04 PM
The final bit to validate on the refresh of the RT4k SVideo(enhances)/CVBS adapter. Easy solder free access to the serial port interface, allowing for serial connectivity to external switchers.
Simple JST PH 3pin connector to keep the form factor as small as possible.
Expect restock by Friday.
Simple JST PH 3pin connector to keep the form factor as small as possible.
Expect restock by Friday.
GDEMU mount for the RE fans coming to Laser Bear soon.
March 26, 2025 at 7:36 PM
GDEMU mount for the RE fans coming to Laser Bear soon.
Refresh of the RT4K SVideo(Enhanced)/CVBS to DB15 adapter, we had some complaints on the original this increases the size of the thumb wheels, and makes it possible to remove the screws from the adapter if desired. There are also pads to bread out the serial coms from the DB15.
March 26, 2025 at 6:53 PM
Refresh of the RT4K SVideo(Enhanced)/CVBS to DB15 adapter, we had some complaints on the original this increases the size of the thumb wheels, and makes it possible to remove the screws from the adapter if desired. There are also pads to bread out the serial coms from the DB15.
Gotta get my thermal probe and figure out where the PSU for this PS2 disappeared to, but the fit for the new Noctua 60x15 fan is perfect. Makes for a really low priced bracket and potentially a simple resistor based fan adapter.
February 20, 2025 at 3:25 PM
Gotta get my thermal probe and figure out where the PSU for this PS2 disappeared to, but the fit for the new Noctua 60x15 fan is perfect. Makes for a really low priced bracket and potentially a simple resistor based fan adapter.
Filling in for shipping while my shipper is out on leave for the next week or two. The temptation was too strong, I ate from my own supply. #gummybears
February 5, 2025 at 4:20 PM
Filling in for shipping while my shipper is out on leave for the next week or two. The temptation was too strong, I ate from my own supply. #gummybears
Meet the MiSTer.2 actively cooled M.2 adapter for MiSTer stacks. Should mount to most MiSTer stack setups. Simple tool free M.2 install. With just 4 mounting screws to attach to your MiSTer stack.
January 23, 2025 at 8:12 PM
Meet the MiSTer.2 actively cooled M.2 adapter for MiSTer stacks. Should mount to most MiSTer stack setups. Simple tool free M.2 install. With just 4 mounting screws to attach to your MiSTer stack.
Rack mounting my gScartSW is gonna clean things up so much.
January 20, 2025 at 9:28 PM
Rack mounting my gScartSW is gonna clean things up so much.
The LCD Jewel project is still in the works, it is moving to a new MCU. The ESP32-P4 is a powerful video enabled MCU that is designed for multimedia, which is what I want the Jewel to do. Here is my first PCB Test, I am just waiting on the P4 to drop for mass manufacturing.
November 27, 2024 at 10:06 PM
The LCD Jewel project is still in the works, it is moving to a new MCU. The ESP32-P4 is a powerful video enabled MCU that is designed for multimedia, which is what I want the Jewel to do. Here is my first PCB Test, I am just waiting on the P4 to drop for mass manufacturing.
Meet the CEC-Enabler, a RP2040 based CEC to USB Keyboard interface for #MiSTer
Software will be open source, allowing for changes in the future to come from the community.
It's based on an open source project called Pico-CEC targeting the same functionality for Home Theater PCs.
(1/2)
Software will be open source, allowing for changes in the future to come from the community.
It's based on an open source project called Pico-CEC targeting the same functionality for Home Theater PCs.
(1/2)
November 1, 2024 at 3:00 PM
Meet the CEC-Enabler, a RP2040 based CEC to USB Keyboard interface for #MiSTer
Software will be open source, allowing for changes in the future to come from the community.
It's based on an open source project called Pico-CEC targeting the same functionality for Home Theater PCs.
(1/2)
Software will be open source, allowing for changes in the future to come from the community.
It's based on an open source project called Pico-CEC targeting the same functionality for Home Theater PCs.
(1/2)
I don't talk about my personal life much here, but I think this is something worth sharing. Next weekend I am marrying my favorite person and moving into a new stage of my life. I just wanted to post something happy and exciting.
October 31, 2024 at 3:53 PM
I don't talk about my personal life much here, but I think this is something worth sharing. Next weekend I am marrying my favorite person and moving into a new stage of my life. I just wanted to post something happy and exciting.
Finalizing some adjustments to the Dreamcast BlueRetro board before ordering the next rev. Core BR functionality has been tested now it's all the fun extras like custom save batteries and RGB LEDs.
October 17, 2024 at 7:54 PM
Finalizing some adjustments to the Dreamcast BlueRetro board before ordering the next rev. Core BR functionality has been tested now it's all the fun extras like custom save batteries and RGB LEDs.