Looking at the photos on their site, it’s a Garmin mount, and not a Quadlock?
November 4, 2025 at 7:32 AM
Looking at the photos on their site, it’s a Garmin mount, and not a Quadlock?
A l’inverse il y a les coques Quadlock, tellement epaisses et lourdes que les boutons ne fonctionnent pas.
October 26, 2025 at 10:20 PM
A l’inverse il y a les coques Quadlock, tellement epaisses et lourdes que les boutons ne fonctionnent pas.
Ja, die Quadlock-Hüllen sind jetzt eher nicht auf der sehr dünnen Seite, stimmt schon. Aber es erstaunt mich immer wieder, wie dünn und klein so ein iPhone plötzlich wird, wenn man es rausholt.
October 19, 2025 at 10:30 AM
Ja, die Quadlock-Hüllen sind jetzt eher nicht auf der sehr dünnen Seite, stimmt schon. Aber es erstaunt mich immer wieder, wie dünn und klein so ein iPhone plötzlich wird, wenn man es rausholt.
Quadlock storewide 20% off
Quadlock storewide 20% off
Went to the Quadlock booth at MotoGP today – they didn’t have the iPhone 17 Pro case yet. Staff said they had to redesign it a bit because of the new camera button on the right side, so release …
dlvr.it
October 18, 2025 at 1:22 PM
Quadlock storewide 20% off
Since I won't be riding my bike as much anymore, I think it's time to swap away from my Quadlock case to a more conventional one for now
October 13, 2025 at 9:42 PM
Since I won't be riding my bike as much anymore, I think it's time to swap away from my Quadlock case to a more conventional one for now
Heh. As I was taking my phone off the QuadLock mount to take some pictures of the Avenue of the Giants, I accidentally pressed the photo button & got the first shot, which isn’t bad if you ignore my head intruding. 😅 Anyway, the Avenue is a magical place.
🌲🌲🚵🏼♂️🌲🌲
#BikeSky #BicycleTravel #California
🌲🌲🚵🏼♂️🌲🌲
#BikeSky #BicycleTravel #California
October 10, 2025 at 12:36 AM
Heh. As I was taking my phone off the QuadLock mount to take some pictures of the Avenue of the Giants, I accidentally pressed the photo button & got the first shot, which isn’t bad if you ignore my head intruding. 😅 Anyway, the Avenue is a magical place.
🌲🌲🚵🏼♂️🌲🌲
#BikeSky #BicycleTravel #California
🌲🌲🚵🏼♂️🌲🌲
#BikeSky #BicycleTravel #California
Dat of Quadlock 🤔
Hij moet eind dit jaar, binnen voor onderhoud. Ik ga er eens navraag naar doen.
Hij moet eind dit jaar, binnen voor onderhoud. Ik ga er eens navraag naar doen.
October 7, 2025 at 8:18 PM
Dat of Quadlock 🤔
Hij moet eind dit jaar, binnen voor onderhoud. Ik ga er eens navraag naar doen.
Hij moet eind dit jaar, binnen voor onderhoud. Ik ga er eens navraag naar doen.
I’d stick w/ the phone personally. Easy peasy to deal with and like you mentioned. You can hear the directions through the bike. Plus you’re set up with the Quadlock and charger. Don’t need anything else really.
October 5, 2025 at 9:06 PM
I’d stick w/ the phone personally. Easy peasy to deal with and like you mentioned. You can hear the directions through the bike. Plus you’re set up with the Quadlock and charger. Don’t need anything else really.
3D Printing is changing the availability and cost of motorcycle parts. 3DMP in Portugal sent us an updated faceplate to test; it was produced in just three days.
#motorcycles #GPS #Navigation #quadlock #motosky
fliesonthevisor.com/3dmp-printed...
#motorcycles #GPS #Navigation #quadlock #motosky
fliesonthevisor.com/3dmp-printed...
3D Printed Parts Made In Portugal – Powered by 3DMP | Flies on the Visor
The cost of prototyping and the speed of development has changed dramitcally with 3D printing. Here's what happened when we called 3DMP about a part we needed.
fliesonthevisor.com
October 5, 2025 at 7:45 PM
3D Printing is changing the availability and cost of motorcycle parts. 3DMP in Portugal sent us an updated faceplate to test; it was produced in just three days.
#motorcycles #GPS #Navigation #quadlock #motosky
fliesonthevisor.com/3dmp-printed...
#motorcycles #GPS #Navigation #quadlock #motosky
fliesonthevisor.com/3dmp-printed...
Yes I can. I played with a few different option but went with ram mounts and a Quadlock mount so I can easily remove it all from the bike when I don’t need it.
October 5, 2025 at 7:17 PM
Yes I can. I played with a few different option but went with ram mounts and a Quadlock mount so I can easily remove it all from the bike when I don’t need it.
Maaaaaaaaan i really am gonna throw something out the window. I should have bought a screen protector from quadlock when i got the case cos the case comes over the edge and pushes on the screen protectors so its not on properly. I bought a cheapish one from big w and i feel like its a big waste of
October 4, 2025 at 3:18 AM
Maaaaaaaaan i really am gonna throw something out the window. I should have bought a screen protector from quadlock when i got the case cos the case comes over the edge and pushes on the screen protectors so its not on properly. I bought a cheapish one from big w and i feel like its a big waste of
The combination of a Migsel bracket holding RAM and QuadLock mounts for my mobile phone feels nice and sturdy.
#StormAmy means it'll be a day or two before I can try it out though.
#Motosky #motorcycle #R1150GSA
#StormAmy means it'll be a day or two before I can try it out though.
#Motosky #motorcycle #R1150GSA
October 3, 2025 at 12:16 PM
The combination of a Migsel bracket holding RAM and QuadLock mounts for my mobile phone feels nice and sturdy.
#StormAmy means it'll be a day or two before I can try it out though.
#Motosky #motorcycle #R1150GSA
#StormAmy means it'll be a day or two before I can try it out though.
#Motosky #motorcycle #R1150GSA
quadlockのスマホ用のやつ欲しいけど、たまにしか乗らない勢にはお高いな
September 28, 2025 at 2:04 AM
quadlockのスマホ用のやつ欲しいけど、たまにしか乗らない勢にはお高いな
Just submitted a return request via a chat bot for a Quadlock adapter.
Rated the experience as 1*.
I was asked to explain why such a low rating.
"Because chat bots are hopeless at even the simplest task"
This screenshot shows the next stage...
Q E fucking D.
Rated the experience as 1*.
I was asked to explain why such a low rating.
"Because chat bots are hopeless at even the simplest task"
This screenshot shows the next stage...
Q E fucking D.
September 24, 2025 at 5:52 PM
Just submitted a return request via a chat bot for a Quadlock adapter.
Rated the experience as 1*.
I was asked to explain why such a low rating.
"Because chat bots are hopeless at even the simplest task"
This screenshot shows the next stage...
Q E fucking D.
Rated the experience as 1*.
I was asked to explain why such a low rating.
"Because chat bots are hopeless at even the simplest task"
This screenshot shows the next stage...
Q E fucking D.
#QuadLock #3M
Don’t trust a quad lock mount that uses 3M adhesive to attach to your phone. Cleaned my Pixel 8 Pro thoroughly and applied the lock as per directions.
Riding over the Second Narrows bridge at 30km/h when my phone detaches from my scooter and skids along the path. 🤬😡
Don’t trust a quad lock mount that uses 3M adhesive to attach to your phone. Cleaned my Pixel 8 Pro thoroughly and applied the lock as per directions.
Riding over the Second Narrows bridge at 30km/h when my phone detaches from my scooter and skids along the path. 🤬😡
September 23, 2025 at 9:28 PM
Instagram needs a way to tell ad makers you already own their product. I love Quadlock, I probably don’t need ads for it still. Can’t I just verify that I already got it?
September 15, 2025 at 7:08 PM
Instagram needs a way to tell ad makers you already own their product. I love Quadlock, I probably don’t need ads for it still. Can’t I just verify that I already got it?
Ah yeah, I put my device in airplane mode and it's on a quadlock wireless charger. Stays at 100%. If I don't put it in airplane mode the charge can barely keep up with consumption. Hunting for a signal...
September 14, 2025 at 12:56 PM
Ah yeah, I put my device in airplane mode and it's on a quadlock wireless charger. Stays at 100%. If I don't put it in airplane mode the charge can barely keep up with consumption. Hunting for a signal...
We hope everyone rowing with an @oarboardrower is enjoying CrewNerd! 🚣♂️ Don’t forget to use the Quadlock to NK Mount Adapter by The Flying Boatman for a perfect footplate setup, and switch to “sliding rigger” in your settings!
September 12, 2025 at 7:19 PM
We hope everyone rowing with an @oarboardrower is enjoying CrewNerd! 🚣♂️ Don’t forget to use the Quadlock to NK Mount Adapter by The Flying Boatman for a perfect footplate setup, and switch to “sliding rigger” in your settings!
fwiw I've been using quadlock mount for probably ten years, their cases are also great phone protectors. if you have a mainstream phone (iphone, samsung, etc) they will have the right case for you and they have matching mounts for bike, running, and car
September 9, 2025 at 3:21 PM
fwiw I've been using quadlock mount for probably ten years, their cases are also great phone protectors. if you have a mainstream phone (iphone, samsung, etc) they will have the right case for you and they have matching mounts for bike, running, and car
I’m using an old iPhone without a sim in a Quadlock case and mount. I paid a one off for downloadable offline worldwide maps from Komoot. I load my route on wifi and use it offline. If I make a mistake I can connect to my phone as a hotspot but rarely need to. Works a treat for me
September 9, 2025 at 12:49 PM
I’m using an old iPhone without a sim in a Quadlock case and mount. I paid a one off for downloadable offline worldwide maps from Komoot. I load my route on wifi and use it offline. If I make a mistake I can connect to my phone as a hotspot but rarely need to. Works a treat for me
This is super annoying for many reasons, but a big one is that I have to get a new QuadLock case.
And I won’t even be able to get rid of all my Lightning cables because my AirPods still need it.
I realize these are very first world problems but that doesn’t make them any less frustrating.
And I won’t even be able to get rid of all my Lightning cables because my AirPods still need it.
I realize these are very first world problems but that doesn’t make them any less frustrating.
September 8, 2025 at 5:04 PM
This is super annoying for many reasons, but a big one is that I have to get a new QuadLock case.
And I won’t even be able to get rid of all my Lightning cables because my AirPods still need it.
I realize these are very first world problems but that doesn’t make them any less frustrating.
And I won’t even be able to get rid of all my Lightning cables because my AirPods still need it.
I realize these are very first world problems but that doesn’t make them any less frustrating.
Phone case turned up and it’s bit earlier….tested in the sink over night and no leaks…epoxy’ing on the quadlock, should be ready for a rattly ride around local trail tomorrow.
It’s all coming together 🤙
It’s all coming together 🤙
September 6, 2025 at 11:19 AM
Phone case turned up and it’s bit earlier….tested in the sink over night and no leaks…epoxy’ing on the quadlock, should be ready for a rattly ride around local trail tomorrow.
It’s all coming together 🤙
It’s all coming together 🤙
I'm glad that eBay is smarter than me. Remembered I could use the quadlock poncho for the trip because of the rain. Found the listing, and it says "you bought this item", so I went and checked where my moto stuff is and lo and behold, I have it already. :D
September 1, 2025 at 7:08 AM
I'm glad that eBay is smarter than me. Remembered I could use the quadlock poncho for the trip because of the rain. Found the listing, and it says "you bought this item", so I went and checked where my moto stuff is and lo and behold, I have it already. :D
Ich könnte es modellieren und Montag drucken.
Eine Sache ist mir noch aufgefallen. In dem Modell auf Makerworld fehlen die Aussparungen auf der Unterseite, damit es einrastet. Ich habe selbst kein X-Lock, habe mir aber schon diverse Adapter für mein QuadLock gedruckt.
Eine Sache ist mir noch aufgefallen. In dem Modell auf Makerworld fehlen die Aussparungen auf der Unterseite, damit es einrastet. Ich habe selbst kein X-Lock, habe mir aber schon diverse Adapter für mein QuadLock gedruckt.
August 30, 2025 at 11:15 AM
Ich könnte es modellieren und Montag drucken.
Eine Sache ist mir noch aufgefallen. In dem Modell auf Makerworld fehlen die Aussparungen auf der Unterseite, damit es einrastet. Ich habe selbst kein X-Lock, habe mir aber schon diverse Adapter für mein QuadLock gedruckt.
Eine Sache ist mir noch aufgefallen. In dem Modell auf Makerworld fehlen die Aussparungen auf der Unterseite, damit es einrastet. Ich habe selbst kein X-Lock, habe mir aber schon diverse Adapter für mein QuadLock gedruckt.
Yes, there needs to be a campaign to get Fairphone to help make better cases. I really want a Quad Lock case but neither Fairphone nor Quadlock seem interested. Surely if Fairphone provided a 3d stencil to Quadlock and ordered a few hundred it could be economical to do a production run?
August 28, 2025 at 12:30 PM
Yes, there needs to be a campaign to get Fairphone to help make better cases. I really want a Quad Lock case but neither Fairphone nor Quadlock seem interested. Surely if Fairphone provided a 3d stencil to Quadlock and ordered a few hundred it could be economical to do a production run?