⚠️ Doughy DoeBoy ⚠️
@oncecaution.bsky.social
18+ NO MINORS 🔞
CW: Furry, Fatfur, Suggestive IRL
24 • He/Him • 🇨🇦 • 2D & 3D Artist, Cyclist, Maker/DIY Hobbyist.
Jeg lærer Dansk, hjælp mig tak.
Aubrin = Hot Cocoa Caribou ☕🦌
Uris = Loaf Shark 🍞🦈
Support me: ko-fi.com/oncecaution
CW: Furry, Fatfur, Suggestive IRL
24 • He/Him • 🇨🇦 • 2D & 3D Artist, Cyclist, Maker/DIY Hobbyist.
Jeg lærer Dansk, hjælp mig tak.
Aubrin = Hot Cocoa Caribou ☕🦌
Uris = Loaf Shark 🍞🦈
Support me: ko-fi.com/oncecaution
I don't need a second relay. I just had to move the Buck/Boost converter to be protected by the Low/High cutoff protection.
Still don't know how to do the rest, though. I have 5.1V and 15V Zener diodes that I'm thinking can set my on range. Allows me to adjust for 6V or 12V batteries.
Still don't know how to do the rest, though. I have 5.1V and 15V Zener diodes that I'm thinking can set my on range. Allows me to adjust for 6V or 12V batteries.
November 16, 2025 at 4:28 PM
I don't need a second relay. I just had to move the Buck/Boost converter to be protected by the Low/High cutoff protection.
Still don't know how to do the rest, though. I have 5.1V and 15V Zener diodes that I'm thinking can set my on range. Allows me to adjust for 6V or 12V batteries.
Still don't know how to do the rest, though. I have 5.1V and 15V Zener diodes that I'm thinking can set my on range. Allows me to adjust for 6V or 12V batteries.
Getting a solar panel or dynamo to charge a 6v battery for lighting and converting it to 5v usb is harder than I thought, but it's coming along... if anyone can help me with the charge controller, hit me up.
November 14, 2025 at 3:52 PM
Getting a solar panel or dynamo to charge a 6v battery for lighting and converting it to 5v usb is harder than I thought, but it's coming along... if anyone can help me with the charge controller, hit me up.
Groggy as hell this morning. Sorry for a somewhat late post; I slept in. Last night was a blur.
Anyway, I woke up to this. Please let me know what you think.
Some weirdos kept entering my local forest a few days ago, so I set up a cheap camera to spy on them. It caught this shit, SCARY RIGHT!?
Anyway, I woke up to this. Please let me know what you think.
Some weirdos kept entering my local forest a few days ago, so I set up a cheap camera to spy on them. It caught this shit, SCARY RIGHT!?
October 28, 2025 at 5:01 PM
Groggy as hell this morning. Sorry for a somewhat late post; I slept in. Last night was a blur.
Anyway, I woke up to this. Please let me know what you think.
Some weirdos kept entering my local forest a few days ago, so I set up a cheap camera to spy on them. It caught this shit, SCARY RIGHT!?
Anyway, I woke up to this. Please let me know what you think.
Some weirdos kept entering my local forest a few days ago, so I set up a cheap camera to spy on them. It caught this shit, SCARY RIGHT!?
Here's a little tease of what's to come...
I just have a little bit of background stuff to do.
Let me know if the brightness is okay.
I just have a little bit of background stuff to do.
Let me know if the brightness is okay.
October 26, 2025 at 3:57 PM
Here's a little tease of what's to come...
I just have a little bit of background stuff to do.
Let me know if the brightness is okay.
I just have a little bit of background stuff to do.
Let me know if the brightness is okay.
Very good and round... unfortunately, the angle reminded me of this. I deeply apologize for this behaviour.
October 25, 2025 at 12:42 AM
Very good and round... unfortunately, the angle reminded me of this. I deeply apologize for this behaviour.
Just purchased a son from the dollar store.
October 18, 2025 at 7:13 PM
Just purchased a son from the dollar store.
There is no character in ANYTHING that I care more about than motherfuckin' Makka Pakka from In the Night Garden.
Love this guy!
Bro just wants to ensure all his friends maintain proper hygiene and take care of their belongings.
I'm not crazy, this guy is peak. The tombliboos are great too.
Love this guy!
Bro just wants to ensure all his friends maintain proper hygiene and take care of their belongings.
I'm not crazy, this guy is peak. The tombliboos are great too.
October 17, 2025 at 1:13 AM
There is no character in ANYTHING that I care more about than motherfuckin' Makka Pakka from In the Night Garden.
Love this guy!
Bro just wants to ensure all his friends maintain proper hygiene and take care of their belongings.
I'm not crazy, this guy is peak. The tombliboos are great too.
Love this guy!
Bro just wants to ensure all his friends maintain proper hygiene and take care of their belongings.
I'm not crazy, this guy is peak. The tombliboos are great too.
Here is more progress on the cyberdeck. Constantly changing plan.
Probably putting an external battery on the bottom.
USB splitter will fit under the SDR and save my 3.0 ports for outer I/O.
Meshtastic module outside controlled by command interface.
Should be room for the Arduino Nano again.
Probably putting an external battery on the bottom.
USB splitter will fit under the SDR and save my 3.0 ports for outer I/O.
Meshtastic module outside controlled by command interface.
Should be room for the Arduino Nano again.
October 15, 2025 at 11:48 PM
Here is more progress on the cyberdeck. Constantly changing plan.
Probably putting an external battery on the bottom.
USB splitter will fit under the SDR and save my 3.0 ports for outer I/O.
Meshtastic module outside controlled by command interface.
Should be room for the Arduino Nano again.
Probably putting an external battery on the bottom.
USB splitter will fit under the SDR and save my 3.0 ports for outer I/O.
Meshtastic module outside controlled by command interface.
Should be room for the Arduino Nano again.
Manly sketches. Maybe I'll finish them someday.
October 10, 2025 at 12:34 AM
Manly sketches. Maybe I'll finish them someday.
Everything is fitting just right!
Had to shift the screen over for its connections.
All I need now is power. 2x 18650 batteries should give me plenty of runtime.
USB breakouts on the way for those connections.
Then, I'll try to figure out a circular connector for the arduino sensor inputs.
Had to shift the screen over for its connections.
All I need now is power. 2x 18650 batteries should give me plenty of runtime.
USB breakouts on the way for those connections.
Then, I'll try to figure out a circular connector for the arduino sensor inputs.
October 4, 2025 at 5:15 PM
Everything is fitting just right!
Had to shift the screen over for its connections.
All I need now is power. 2x 18650 batteries should give me plenty of runtime.
USB breakouts on the way for those connections.
Then, I'll try to figure out a circular connector for the arduino sensor inputs.
Had to shift the screen over for its connections.
All I need now is power. 2x 18650 batteries should give me plenty of runtime.
USB breakouts on the way for those connections.
Then, I'll try to figure out a circular connector for the arduino sensor inputs.
I have narrowed my plan down to a cyberdeck with an SDR. I wanted to make a mini hardcase PC in the past, anyway.
Trying to fit everything into a Nanuk 225 case. I will be using the Raspberry Pi 4b 4GB, NooElec NESDR v5 RTL-SDR dongle, and a 5" LCD screen. It's gonna be tight!
Trying to fit everything into a Nanuk 225 case. I will be using the Raspberry Pi 4b 4GB, NooElec NESDR v5 RTL-SDR dongle, and a 5" LCD screen. It's gonna be tight!
September 30, 2025 at 12:20 AM
I have narrowed my plan down to a cyberdeck with an SDR. I wanted to make a mini hardcase PC in the past, anyway.
Trying to fit everything into a Nanuk 225 case. I will be using the Raspberry Pi 4b 4GB, NooElec NESDR v5 RTL-SDR dongle, and a 5" LCD screen. It's gonna be tight!
Trying to fit everything into a Nanuk 225 case. I will be using the Raspberry Pi 4b 4GB, NooElec NESDR v5 RTL-SDR dongle, and a 5" LCD screen. It's gonna be tight!
Took a picture of it on my ride back home. Unfortunately, the plastic threads are already stripping from the vibrations, so I've ordered an aluminum one.
September 24, 2025 at 3:21 AM
Took a picture of it on my ride back home. Unfortunately, the plastic threads are already stripping from the vibrations, so I've ordered an aluminum one.
Here are some teasers to get your attention.
September 22, 2025 at 4:01 PM
Here are some teasers to get your attention.
Modeled, printed, and added some satin clearcoat to a handlebar extension for my bike.
Now I can have mirrors and there's room for a light and reciever in the future.
I used PLA, so clearcoat is really important to extend the life of it outside. It's still curing...
I can't currently print ASA.
Now I can have mirrors and there's room for a light and reciever in the future.
I used PLA, so clearcoat is really important to extend the life of it outside. It's still curing...
I can't currently print ASA.
September 20, 2025 at 9:57 PM
Modeled, printed, and added some satin clearcoat to a handlebar extension for my bike.
Now I can have mirrors and there's room for a light and reciever in the future.
I used PLA, so clearcoat is really important to extend the life of it outside. It's still curing...
I can't currently print ASA.
Now I can have mirrors and there's room for a light and reciever in the future.
I used PLA, so clearcoat is really important to extend the life of it outside. It's still curing...
I can't currently print ASA.
Books! Yeah, knowledge!
September 9, 2025 at 11:01 PM
Books! Yeah, knowledge!
What flavour is your sona?
September 7, 2025 at 4:30 PM
What flavour is your sona?
They arrived! I updated the software on this one and printed a frame for it.
I still need a better antenna to hear anything other than FM music stations and static.
The sound is really good, though.
It's also super tiny, I love it!
I still need a better antenna to hear anything other than FM music stations and static.
The sound is really good, though.
It's also super tiny, I love it!
September 7, 2025 at 4:06 PM
They arrived! I updated the software on this one and printed a frame for it.
I still need a better antenna to hear anything other than FM music stations and static.
The sound is really good, though.
It's also super tiny, I love it!
I still need a better antenna to hear anything other than FM music stations and static.
The sound is really good, though.
It's also super tiny, I love it!
I need more friends who are interested in talking about the topics I do.
Where my friendly cyclists at?
Where my radio enthusiasts?
My woodworkers and leatherworkers?
Electronics hobbyists?
DIYers?
Campers???
Bakers?!?
Traditional craftsmen?!?!?
Streamers?
... even Doomsday preppers are welcome!
Where my friendly cyclists at?
Where my radio enthusiasts?
My woodworkers and leatherworkers?
Electronics hobbyists?
DIYers?
Campers???
Bakers?!?
Traditional craftsmen?!?!?
Streamers?
... even Doomsday preppers are welcome!
August 31, 2025 at 3:54 AM
I need more friends who are interested in talking about the topics I do.
Where my friendly cyclists at?
Where my radio enthusiasts?
My woodworkers and leatherworkers?
Electronics hobbyists?
DIYers?
Campers???
Bakers?!?
Traditional craftsmen?!?!?
Streamers?
... even Doomsday preppers are welcome!
Where my friendly cyclists at?
Where my radio enthusiasts?
My woodworkers and leatherworkers?
Electronics hobbyists?
DIYers?
Campers???
Bakers?!?
Traditional craftsmen?!?!?
Streamers?
... even Doomsday preppers are welcome!
Honestly, $5 for a bodycam or found footage garbage-quality camera. I kind of like it; it has some character. 720p INTERPOLATED, whatever that means. Sounds and looks like 480p to me.
August 30, 2025 at 4:01 AM
Honestly, $5 for a bodycam or found footage garbage-quality camera. I kind of like it; it has some character. 720p INTERPOLATED, whatever that means. Sounds and looks like 480p to me.
Congrats! Someday, I hope to get there myself, but thank you for being so supportive of me. You deserve even more!
August 24, 2025 at 1:48 PM
Congrats! Someday, I hope to get there myself, but thank you for being so supportive of me. You deserve even more!
Actually, not bad. I'm not so sure about the first one and last two, but it's pretty accurate apart from those.
August 22, 2025 at 2:49 PM
Actually, not bad. I'm not so sure about the first one and last two, but it's pretty accurate apart from those.
CW: Horny Thoughts Post
I've shared a few of my fantasies over the last two years. The few times I felt horny, I have been open about it. I still stand by these kinks, as weird as they might make me.
These were in an NSFW server. I've explained my feelings in quite some detail there.
I've shared a few of my fantasies over the last two years. The few times I felt horny, I have been open about it. I still stand by these kinks, as weird as they might make me.
These were in an NSFW server. I've explained my feelings in quite some detail there.
August 19, 2025 at 3:07 AM
CW: Horny Thoughts Post
I've shared a few of my fantasies over the last two years. The few times I felt horny, I have been open about it. I still stand by these kinks, as weird as they might make me.
These were in an NSFW server. I've explained my feelings in quite some detail there.
I've shared a few of my fantasies over the last two years. The few times I felt horny, I have been open about it. I still stand by these kinks, as weird as they might make me.
These were in an NSFW server. I've explained my feelings in quite some detail there.
I'm so real for this one.
August 19, 2025 at 2:43 AM
I'm so real for this one.
Just a little guy. Need more VR pics.
August 1, 2025 at 4:50 PM
Just a little guy. Need more VR pics.
July 25, 2025 at 3:03 PM