Kytor
@kytor.com
Technology and automotive enthusiast. Engineer. Traveler. Photographer. Maker.
youtube.com/@kytor
kytor.com/store
youtube.com/@kytor
kytor.com/store
I am beyond buried getting situated in the new place. My lab / office won’t be set up for a few more weeks after new carpet goes in. But I went on a quick side quest to at least get this little oasis set up.
November 6, 2025 at 11:36 PM
I am beyond buried getting situated in the new place. My lab / office won’t be set up for a few more weeks after new carpet goes in. But I went on a quick side quest to at least get this little oasis set up.
I’m almost done moving, but now I’m deep into conducting repairs and upgrades. It’s an exhausting process!
My office / electronics lab won’t be set up for another few weeks yet.
Orders continue to ship out with only minor delays.
My office / electronics lab won’t be set up for another few weeks yet.
Orders continue to ship out with only minor delays.
November 2, 2025 at 2:38 AM
I’m almost done moving, but now I’m deep into conducting repairs and upgrades. It’s an exhausting process!
My office / electronics lab won’t be set up for another few weeks yet.
Orders continue to ship out with only minor delays.
My office / electronics lab won’t be set up for another few weeks yet.
Orders continue to ship out with only minor delays.
Orders may be delayed just a couple of days as I complete my move. Thank you for your patience!
October 25, 2025 at 8:49 PM
Orders may be delayed just a couple of days as I complete my move. Thank you for your patience!
I’m tossing out a pile of old pens that have collected in my closet over the years.
But I have to keep these absolute treasures.
Can anyone confirm whether *ALL* GeForce GPUs are still Vista certified or was this a lie?
But I have to keep these absolute treasures.
Can anyone confirm whether *ALL* GeForce GPUs are still Vista certified or was this a lie?
October 19, 2025 at 11:52 AM
I’m tossing out a pile of old pens that have collected in my closet over the years.
But I have to keep these absolute treasures.
Can anyone confirm whether *ALL* GeForce GPUs are still Vista certified or was this a lie?
But I have to keep these absolute treasures.
Can anyone confirm whether *ALL* GeForce GPUs are still Vista certified or was this a lie?
Reposted by Kytor
Back in Stock! MASE - MiSTer Attached SATA Enclosure
Don't forgot we also have inline power switches for your MiSTer and MiSTer Pi setups.
Like and repost pls!
retrofrog.net/products/mas...
Don't forgot we also have inline power switches for your MiSTer and MiSTer Pi setups.
Like and repost pls!
retrofrog.net/products/mas...
MASE - MiSTer Attached SATA Enclosure
Do you need bulk storage for your games and stuff on your MiSTer FPGA but regular microSD cards aren't cutting it? Enter MASE - the MiSTer Attached SATA Enclosure. This purpose designed enclosure ho...
retrofrog.net
October 17, 2025 at 6:02 PM
Back in Stock! MASE - MiSTer Attached SATA Enclosure
Don't forgot we also have inline power switches for your MiSTer and MiSTer Pi setups.
Like and repost pls!
retrofrog.net/products/mas...
Don't forgot we also have inline power switches for your MiSTer and MiSTer Pi setups.
Like and repost pls!
retrofrog.net/products/mas...
I’m moving!
Which means it’s time to pack up my wall of aging plastic.
I’ve temporary closed the eBay and Etsy stores for the next couple of weeks. The direct store remains open.
Which means it’s time to pack up my wall of aging plastic.
I’ve temporary closed the eBay and Etsy stores for the next couple of weeks. The direct store remains open.
October 17, 2025 at 12:48 PM
I’m moving!
Which means it’s time to pack up my wall of aging plastic.
I’ve temporary closed the eBay and Etsy stores for the next couple of weeks. The direct store remains open.
Which means it’s time to pack up my wall of aging plastic.
I’ve temporary closed the eBay and Etsy stores for the next couple of weeks. The direct store remains open.
I feel like the PS3 is perhaps one of the least revered platforms
Which is a real shame, because it has a significant quantity of exclusives that have not, and will likely never be, ported out
Which is a real shame, because it has a significant quantity of exclusives that have not, and will likely never be, ported out
October 14, 2025 at 1:55 AM
I feel like the PS3 is perhaps one of the least revered platforms
Which is a real shame, because it has a significant quantity of exclusives that have not, and will likely never be, ported out
Which is a real shame, because it has a significant quantity of exclusives that have not, and will likely never be, ported out
This is gorgeous
Cette Game Boy rentre sans hésiter au panthéon des plus belles que j’ai pu réaliser !
La coque est signée 𝗦𝘂𝗽𝗲𝗿𝗴𝘂𝗶𝗹𝗮𝗻𝗱, une vraie merveille 🥰
À l’intérieur : une 𝗗𝗠𝗚𝗖, la fusion parfaite entre une 𝗚𝗮𝗺𝗲 𝗕𝗼𝘆 et une 𝗖𝗼𝗹𝗼𝗿, un mod créé par @mousebitelabs.bsky.social 👌
La coque est signée 𝗦𝘂𝗽𝗲𝗿𝗴𝘂𝗶𝗹𝗮𝗻𝗱, une vraie merveille 🥰
À l’intérieur : une 𝗗𝗠𝗚𝗖, la fusion parfaite entre une 𝗚𝗮𝗺𝗲 𝗕𝗼𝘆 et une 𝗖𝗼𝗹𝗼𝗿, un mod créé par @mousebitelabs.bsky.social 👌
October 3, 2025 at 12:45 PM
This is gorgeous
Some server upgrades (new mobo + Arc a310 for better AV1 transcoding etc) successfully completed. It’s always nice when it posts first try.
6x 14TB HDD
3x 1TB NVME
64GB RAM
i9-10850K
6x 14TB HDD
3x 1TB NVME
64GB RAM
i9-10850K
September 29, 2025 at 4:31 PM
Some server upgrades (new mobo + Arc a310 for better AV1 transcoding etc) successfully completed. It’s always nice when it posts first try.
6x 14TB HDD
3x 1TB NVME
64GB RAM
i9-10850K
6x 14TB HDD
3x 1TB NVME
64GB RAM
i9-10850K
Six more replica light bars shipping out to Jurassic Jeep builders!
September 28, 2025 at 4:09 PM
Six more replica light bars shipping out to Jurassic Jeep builders!
Designing a cable testing station for @retro-access.com to facilitate QC final
September 27, 2025 at 5:56 PM
Designing a cable testing station for @retro-access.com to facilitate QC final
The new website has a "Resources" section with quick links to my Printables, MakerWorld, GrabCAD archives and more. There is also a list of the tools and supplies that I personally use and trust. Check it out!
kytor.com/resources
kytor.com/resources
Resources
Social Media 3D Printing An extensive free library of display stands, repair parts, shells and just for fun. Jurassic Replicas Visit the sacred texts for the ultimate reference guide to building a rep...
kytor.com
September 24, 2025 at 7:32 PM
The new website has a "Resources" section with quick links to my Printables, MakerWorld, GrabCAD archives and more. There is also a list of the tools and supplies that I personally use and trust. Check it out!
kytor.com/resources
kytor.com/resources
The Kytor Industries direct store is now back online!
kytor.com/store
Thank you for your patience!
If you experience any issues, please let me know and I will work to quickly resolve them.
kytor.com/store
Thank you for your patience!
If you experience any issues, please let me know and I will work to quickly resolve them.
Kytor Industries – Custom Designs & Fabrications
kytor.com
September 21, 2025 at 2:32 PM
The Kytor Industries direct store is now back online!
kytor.com/store
Thank you for your patience!
If you experience any issues, please let me know and I will work to quickly resolve them.
kytor.com/store
Thank you for your patience!
If you experience any issues, please let me know and I will work to quickly resolve them.
Collecting them all like Pokemon gym badges
@retrorgb.bsky.social @retrotechusa.bsky.social @machonachomedia.bsky.social @lgr-yt.bsky.social @retrotink.com
@retrorgb.bsky.social @retrotechusa.bsky.social @machonachomedia.bsky.social @lgr-yt.bsky.social @retrotink.com
September 20, 2025 at 9:28 PM
Collecting them all like Pokemon gym badges
@retrorgb.bsky.social @retrotechusa.bsky.social @machonachomedia.bsky.social @lgr-yt.bsky.social @retrotink.com
@retrorgb.bsky.social @retrotechusa.bsky.social @machonachomedia.bsky.social @lgr-yt.bsky.social @retrotink.com
The all new Kytor website is live. If you experience any bugs, please reach out.
The store will re-open shortly, hopefully today.
Thanks for your patience!
kytor.com
The store will re-open shortly, hopefully today.
Thanks for your patience!
kytor.com
Kytor Industries
Custom Designs & Fabrication.
kytor.com
September 20, 2025 at 1:50 PM
The all new Kytor website is live. If you experience any bugs, please reach out.
The store will re-open shortly, hopefully today.
Thanks for your patience!
kytor.com
The store will re-open shortly, hopefully today.
Thanks for your patience!
kytor.com
The Kytor direct store is currently down for maintenance and migration.
I hope to be back up tomorrow morning! Stay tuned.
I hope to be back up tomorrow morning! Stay tuned.
September 20, 2025 at 2:55 AM
The Kytor direct store is currently down for maintenance and migration.
I hope to be back up tomorrow morning! Stay tuned.
I hope to be back up tomorrow morning! Stay tuned.
September 12, 2025 at 2:41 PM
Orders for the fall 2025 Light Bar batch will open tomorrow morning, with delivery in 4-6 weeks.
*** THE NEXT LIGHT BAR BATCH WILL BE IN MAY / JUNE 2026 ***
kytor.com/store/produc...
*** THE NEXT LIGHT BAR BATCH WILL BE IN MAY / JUNE 2026 ***
kytor.com/store/produc...
September 11, 2025 at 12:08 PM
Orders for the fall 2025 Light Bar batch will open tomorrow morning, with delivery in 4-6 weeks.
*** THE NEXT LIGHT BAR BATCH WILL BE IN MAY / JUNE 2026 ***
kytor.com/store/produc...
*** THE NEXT LIGHT BAR BATCH WILL BE IN MAY / JUNE 2026 ***
kytor.com/store/produc...
Hello friends.
I am moving soon which means an interruption in my workshop.
New production of welded products will be temporarily suspended (est. downtime ~8 weeks), powder coating will not resume until around Spring 2025.
No to minimal interruption to 3D printed products.
/1
I am moving soon which means an interruption in my workshop.
New production of welded products will be temporarily suspended (est. downtime ~8 weeks), powder coating will not resume until around Spring 2025.
No to minimal interruption to 3D printed products.
/1
September 8, 2025 at 3:19 PM
Hello friends.
I am moving soon which means an interruption in my workshop.
New production of welded products will be temporarily suspended (est. downtime ~8 weeks), powder coating will not resume until around Spring 2025.
No to minimal interruption to 3D printed products.
/1
I am moving soon which means an interruption in my workshop.
New production of welded products will be temporarily suspended (est. downtime ~8 weeks), powder coating will not resume until around Spring 2025.
No to minimal interruption to 3D printed products.
/1
Good morning.
I have made available the CAD model (STP file) for the Nintendo (SNES) AV Multi-Out male connector. It is dimensionally accurate but not intended for production purposes.
Free download on GrabCAD.
grabcad.com/library/nint...
I have made available the CAD model (STP file) for the Nintendo (SNES) AV Multi-Out male connector. It is dimensionally accurate but not intended for production purposes.
Free download on GrabCAD.
grabcad.com/library/nint...
August 31, 2025 at 1:03 PM
Good morning.
I have made available the CAD model (STP file) for the Nintendo (SNES) AV Multi-Out male connector. It is dimensionally accurate but not intended for production purposes.
Free download on GrabCAD.
grabcad.com/library/nint...
I have made available the CAD model (STP file) for the Nintendo (SNES) AV Multi-Out male connector. It is dimensionally accurate but not intended for production purposes.
Free download on GrabCAD.
grabcad.com/library/nint...
I'm not finished yet, but this is probably the most detailed and accurate SCART CAD model in existence.
August 28, 2025 at 2:36 AM
I'm not finished yet, but this is probably the most detailed and accurate SCART CAD model in existence.
CAD models (STP) for Mini DIN 9 and Mini DIN 10 vertical PCB mount male connectors are now available for free on my GrabCAD library:
grabcad.com/library/mini...
grabcad.com/library/mini...
Free CAD Designs, Files & 3D Models | The GrabCAD Community Library
The GrabCAD Library offers millions of free CAD designs, CAD files, and 3D models. Join the GrabCAD Community today to gain access and download!
grabcad.com
August 25, 2025 at 7:17 PM
CAD models (STP) for Mini DIN 9 and Mini DIN 10 vertical PCB mount male connectors are now available for free on my GrabCAD library:
grabcad.com/library/mini...
grabcad.com/library/mini...
I wasn't super happy with the quality, accuracy and detail on the male SCART connector models available online.
So let's start over, and make a brand new one!
So let's start over, and make a brand new one!
August 25, 2025 at 1:00 AM
I wasn't super happy with the quality, accuracy and detail on the male SCART connector models available online.
So let's start over, and make a brand new one!
So let's start over, and make a brand new one!