Jay Tolleson
@jaytolleson.bsky.social
Fisherman and designer here.....part-time and unpaid
I have the blueprint. Cost $170. Done. Purchased on Amazon. Floats 1.25 lbs soon to be helium floated 1.5 lbs. Wireless power transmitter/reciever. 3.3v Aerator/12 50w heat on a thermostat. Step down lowers demand to 45 of the allowed 48 watts. Electronics are kevlar-rubber coated aswell.
February 9, 2026 at 6:05 PM
I have the blueprint. Cost $170. Done. Purchased on Amazon. Floats 1.25 lbs soon to be helium floated 1.5 lbs. Wireless power transmitter/reciever. 3.3v Aerator/12 50w heat on a thermostat. Step down lowers demand to 45 of the allowed 48 watts. Electronics are kevlar-rubber coated aswell.
i bought the goods with a Fahrenheit sensor. Made quacamole w broccoli bell pepper n spinach n cheese. i will watch the halftime show w folks.
February 9, 2026 at 12:36 AM
i bought the goods with a Fahrenheit sensor. Made quacamole w broccoli bell pepper n spinach n cheese. i will watch the halftime show w folks.
ok so this model has 33.6 in^3 of air trapped to float about 1.25 lbs. it is 20 in high, and the float carriage is 3"x3"x7". I can have it made for roughly $125 in China however I will safely use my own tools for a total cost of like $150 with electronics.
February 8, 2026 at 3:09 AM
ok so this model has 33.6 in^3 of air trapped to float about 1.25 lbs. it is 20 in high, and the float carriage is 3"x3"x7". I can have it made for roughly $125 in China however I will safely use my own tools for a total cost of like $150 with electronics.
i am goin to dig on day 14.5 all 3. photoperiod...
February 7, 2026 at 6:19 PM
i am goin to dig on day 14.5 all 3. photoperiod...
I could fit 4 hits of autogrow......every 2 weeks. in 27 cu in. that floated.
February 7, 2026 at 6:15 PM
I could fit 4 hits of autogrow......every 2 weeks. in 27 cu in. that floated.
liquid sealed....
February 7, 2026 at 4:51 PM
liquid sealed....
i bought super glue to drip down the lines.....it was gel on accident. ya....
February 7, 2026 at 2:59 PM
i bought super glue to drip down the lines.....it was gel on accident. ya....
so i am going to have changed what i needed initially quite a bit without dropping all the funds.
February 7, 2026 at 12:05 AM
so i am going to have changed what i needed initially quite a bit without dropping all the funds.
the machine needs electronics
February 6, 2026 at 8:20 PM
the machine needs electronics
rough end needs improvement and (4)4" panels need 3/8" cut long ways at 45 deg. To decrease the gap...
February 6, 2026 at 5:56 PM
rough end needs improvement and (4)4" panels need 3/8" cut long ways at 45 deg. To decrease the gap...
needs 4 terrifying 15 amp saw cuts to fit better. =floats 12 oz
February 6, 2026 at 5:48 PM
needs 4 terrifying 15 amp saw cuts to fit better. =floats 12 oz
$232 next month on the side. I am very interested....i might start with the Taidacent its 50 dollars...on the side. A step down is used to run 10.8VDC so as to fit under 48 watts. the boards fit in empty space int the white box....that is visable next to the turbine-aerator.
February 5, 2026 at 10:40 PM
$232 next month on the side. I am very interested....i might start with the Taidacent its 50 dollars...on the side. A step down is used to run 10.8VDC so as to fit under 48 watts. the boards fit in empty space int the white box....that is visable next to the turbine-aerator.
what was the question?
i might power it with two or 4 rails .....so the electronics can be hidden in the wood part of the float. .......rather than wires over the top......there is a wireless 12v 1 a tradacent usb charger thing too.........it would be too week to heat.
i might power it with two or 4 rails .....so the electronics can be hidden in the wood part of the float. .......rather than wires over the top......there is a wireless 12v 1 a tradacent usb charger thing too.........it would be too week to heat.
February 5, 2026 at 5:42 PM
what was the question?
i might power it with two or 4 rails .....so the electronics can be hidden in the wood part of the float. .......rather than wires over the top......there is a wireless 12v 1 a tradacent usb charger thing too.........it would be too week to heat.
i might power it with two or 4 rails .....so the electronics can be hidden in the wood part of the float. .......rather than wires over the top......there is a wireless 12v 1 a tradacent usb charger thing too.........it would be too week to heat.
Well, my side - Marijuana - is taking over. I think my electricity skills are well used here...and i want to make a 3-5 inch version for a banzai weed. Or a watermelon with roots that has a tap for juice...like i could pour a cup of water in and get juice.....I will do more
February 5, 2026 at 4:09 PM
Well, my side - Marijuana - is taking over. I think my electricity skills are well used here...and i want to make a 3-5 inch version for a banzai weed. Or a watermelon with roots that has a tap for juice...like i could pour a cup of water in and get juice.....I will do more