Bron Hebog
@bronhebog.bsky.social
Railway modeller based in Scotland. Best known for 009 layouts of Dduallt and Bron Hebog (Beddgelert) and our latest project Minffordd
Good news Simplex fans - Mary Ann rides again! A cheeky CV8 reset this morning its digital brain is following instructions once more.
November 16, 2025 at 9:28 AM
Good news Simplex fans - Mary Ann rides again! A cheeky CV8 reset this morning its digital brain is following instructions once more.
More chassis mileage for the NG15 tonight, attracting a lot of interest on the Greenock & District Model Railway Club test track and admiring comments about the Bowaters Models body even though it’s just a rough test print.
November 7, 2025 at 10:27 PM
More chassis mileage for the NG15 tonight, attracting a lot of interest on the Greenock & District Model Railway Club test track and admiring comments about the Bowaters Models body even though it’s just a rough test print.
With a new keeper plate and pick ups fitted the NG15 chassis can get some running-in laps of the test track.
November 4, 2025 at 4:02 PM
With a new keeper plate and pick ups fitted the NG15 chassis can get some running-in laps of the test track.
First update on the NG15 chassis in a while.
I’ve replaced some of the Farish 08 crank ‘pins’ with the screws from the 8F which meant very carefully opening out the plastic cranks with a 0.6mm drill.
Running much smoother with less ‘play’ now.
I’ve replaced some of the Farish 08 crank ‘pins’ with the screws from the 8F which meant very carefully opening out the plastic cranks with a 0.6mm drill.
Running much smoother with less ‘play’ now.
November 2, 2025 at 9:05 AM
First update on the NG15 chassis in a while.
I’ve replaced some of the Farish 08 crank ‘pins’ with the screws from the 8F which meant very carefully opening out the plastic cranks with a 0.6mm drill.
Running much smoother with less ‘play’ now.
I’ve replaced some of the Farish 08 crank ‘pins’ with the screws from the 8F which meant very carefully opening out the plastic cranks with a 0.6mm drill.
Running much smoother with less ‘play’ now.