Bark it Up! Suits and Rave Gear
@barkitup.dog
Custom Rave gear, Fursuits and adoptable Art refs
-
Owners
@zbit.barkitup.dog -Electronics and Management.
@mori.barkitup.dog - Hiatus
Banner art @beeptreat.bsky.social
-
Owners
@zbit.barkitup.dog -Electronics and Management.
@mori.barkitup.dog - Hiatus
Banner art @beeptreat.bsky.social
Me wearing it. I'm small so the neck bunches up a lot more than it should. But it will bunch up a bit with anyone.
January 29, 2026 at 11:24 PM
Me wearing it. I'm small so the neck bunches up a lot more than it should. But it will bunch up a bit with anyone.
Reposted by Bark it Up! Suits and Rave Gear
#FurFest
Gear looks to be working fairly well!
I'm slightly concerned on the red activity, may look at raising the upper limit of the sensitivity range ...
I got my X right next to a woofer...
Red is a little overactive... Maybe?
:3c
Gear looks to be working fairly well!
I'm slightly concerned on the red activity, may look at raising the upper limit of the sensitivity range ...
I got my X right next to a woofer...
Red is a little overactive... Maybe?
:3c
December 6, 2025 at 1:16 AM
#FurFest
Gear looks to be working fairly well!
I'm slightly concerned on the red activity, may look at raising the upper limit of the sensitivity range ...
I got my X right next to a woofer...
Red is a little overactive... Maybe?
:3c
Gear looks to be working fairly well!
I'm slightly concerned on the red activity, may look at raising the upper limit of the sensitivity range ...
I got my X right next to a woofer...
Red is a little overactive... Maybe?
:3c
Getting bags ready for packing out of the garage.
Find spare material to make leash (or two?) in said bags.
Woo!
<3
-Z
Find spare material to make leash (or two?) in said bags.
Woo!
<3
-Z
November 28, 2025 at 3:40 AM
Getting bags ready for packing out of the garage.
Find spare material to make leash (or two?) in said bags.
Woo!
<3
-Z
Find spare material to make leash (or two?) in said bags.
Woo!
<3
-Z
Modular 3-pin JST connector used.
Connects to harness/collar at specific input points.
Switching on, the LEDs will flash green and start in static FFT mode.
Press the button to switch modes.
Hold the button until the LEDs flash Red to lock.
Hold the button until the LEDs flash green to unlock.
Connects to harness/collar at specific input points.
Switching on, the LEDs will flash green and start in static FFT mode.
Press the button to switch modes.
Hold the button until the LEDs flash Red to lock.
Hold the button until the LEDs flash green to unlock.
November 18, 2025 at 4:07 PM
Modular 3-pin JST connector used.
Connects to harness/collar at specific input points.
Switching on, the LEDs will flash green and start in static FFT mode.
Press the button to switch modes.
Hold the button until the LEDs flash Red to lock.
Hold the button until the LEDs flash green to unlock.
Connects to harness/collar at specific input points.
Switching on, the LEDs will flash green and start in static FFT mode.
Press the button to switch modes.
Hold the button until the LEDs flash Red to lock.
Hold the button until the LEDs flash green to unlock.
🔧 Tech specs:
- SAMD21 ARM Cortex-M0+ processor
- 12kHz sampling rate, real-time FFT
- Custom PCB (open source on GitHub)
- UF2 bootloader (drag-drop firmware/code updates)
- MCP73831 charging (1A safe rate)
- PETG enclosures (convention-durable)
Full docs: github.com/joshuawboone...
<3
-Z
- SAMD21 ARM Cortex-M0+ processor
- 12kHz sampling rate, real-time FFT
- Custom PCB (open source on GitHub)
- UF2 bootloader (drag-drop firmware/code updates)
- MCP73831 charging (1A safe rate)
- PETG enclosures (convention-durable)
Full docs: github.com/joshuawboone...
<3
-Z
November 9, 2025 at 10:39 PM
🔧 Tech specs:
- SAMD21 ARM Cortex-M0+ processor
- 12kHz sampling rate, real-time FFT
- Custom PCB (open source on GitHub)
- UF2 bootloader (drag-drop firmware/code updates)
- MCP73831 charging (1A safe rate)
- PETG enclosures (convention-durable)
Full docs: github.com/joshuawboone...
<3
-Z
- SAMD21 ARM Cortex-M0+ processor
- 12kHz sampling rate, real-time FFT
- Custom PCB (open source on GitHub)
- UF2 bootloader (drag-drop firmware/code updates)
- MCP73831 charging (1A safe rate)
- PETG enclosures (convention-durable)
Full docs: github.com/joshuawboone...
<3
-Z
*600+ LEDs at 1/8 brightness
**6+ hours tested with 300 LED test array
Dynamic sensitivity adjustment keeps all frequency ranges responsive regardless of music style or volume level.
<3
-Z
**6+ hours tested with 300 LED test array
Dynamic sensitivity adjustment keeps all frequency ranges responsive regardless of music style or volume level.
<3
-Z
November 9, 2025 at 10:38 PM
*600+ LEDs at 1/8 brightness
**6+ hours tested with 300 LED test array
Dynamic sensitivity adjustment keeps all frequency ranges responsive regardless of music style or volume level.
<3
-Z
**6+ hours tested with 300 LED test array
Dynamic sensitivity adjustment keeps all frequency ranges responsive regardless of music style or volume level.
<3
-Z
FFT video of the X as a treat!
Gotta sew these up and run full battery life tests!
<3
-Z
Gotta sew these up and run full battery life tests!
<3
-Z
November 9, 2025 at 9:37 PM
FFT video of the X as a treat!
Gotta sew these up and run full battery life tests!
<3
-Z
Gotta sew these up and run full battery life tests!
<3
-Z