Willow Creative
@willowcreativ.com
I make characters become reality! Costumes, 3D printing, videogames.
Do not reupload my content.
Contact: [email protected]
www.willowcreativ.com
Do not reupload my content.
Contact: [email protected]
www.willowcreativ.com
Pinned
Willow Creative
@willowcreativ.com
· Oct 17
Hi! I'm Willow Creative from the Netherlands and I build costumes & props from videogames and more. I sell costume parts on my shop, create cosplay content and feature as cosplay model, guest & judge for events! See more at willowcreativ.com
im reading into a lil of the sparkfun vs adafruit drama and its fking wild (sparkfun will no longer supply teensy boards to adafruit)
January 14, 2026 at 9:35 PM
im reading into a lil of the sparkfun vs adafruit drama and its fking wild (sparkfun will no longer supply teensy boards to adafruit)
This @josefprusa Prusa Core One L 3dprinter is my newest addition to my work, thanks to Prusa for your support! This machine is big, fast and well tuned. Its got the trifecta of big, fast and good. Pretty impressed with it so far! #cosplay #3dprinting
January 14, 2026 at 1:02 AM
This @josefprusa Prusa Core One L 3dprinter is my newest addition to my work, thanks to Prusa for your support! This machine is big, fast and well tuned. Its got the trifecta of big, fast and good. Pretty impressed with it so far! #cosplay #3dprinting
Got the new adafruit trinket and now i got the full igni silver sword effect going 💪
January 13, 2026 at 12:26 AM
Got the new adafruit trinket and now i got the full igni silver sword effect going 💪
if i make a mold of the geometric pattern with an inlay of the reflection pattern, and then pour clear rubber in, lay the mesh on top, then i can make stretchy rubber diamonds instead🤔
tricky is transferring the pattern to the bottom of the mold + not have rubber flashing in the mesh
tricky is transferring the pattern to the bottom of the mold + not have rubber flashing in the mesh
A diamond look for emma frost idea, ill try a few different filaments. 3dprinted on prusa XL using kaizen3d sheet with protopasta thermocromic filament #cosplay #3dprinting
January 12, 2026 at 6:07 AM
if i make a mold of the geometric pattern with an inlay of the reflection pattern, and then pour clear rubber in, lay the mesh on top, then i can make stretchy rubber diamonds instead🤔
tricky is transferring the pattern to the bottom of the mold + not have rubber flashing in the mesh
tricky is transferring the pattern to the bottom of the mold + not have rubber flashing in the mesh
Old dremel lite usb port broke off and the battery was losing charge anyway so i got one of those ryobi usb swappable batteries instead
January 12, 2026 at 2:53 AM
Old dremel lite usb port broke off and the battery was losing charge anyway so i got one of those ryobi usb swappable batteries instead
A diamond look for emma frost idea, ill try a few different filaments. 3dprinted on prusa XL using kaizen3d sheet with protopasta thermocromic filament #cosplay #3dprinting
January 12, 2026 at 2:52 AM
A diamond look for emma frost idea, ill try a few different filaments. 3dprinted on prusa XL using kaizen3d sheet with protopasta thermocromic filament #cosplay #3dprinting
My first full volume 3dprint on my new Prusa Core one L (thank you prusa for the machine)
I printed a custom head scaled to my 3d scan and slightly angled, so i can easily work on the face of masks without twisting it around.
Printed in PETG in 12 hours. Really good quality!
I printed a custom head scaled to my 3d scan and slightly angled, so i can easily work on the face of masks without twisting it around.
Printed in PETG in 12 hours. Really good quality!
January 10, 2026 at 5:18 PM
My first full volume 3dprint on my new Prusa Core one L (thank you prusa for the machine)
I printed a custom head scaled to my 3d scan and slightly angled, so i can easily work on the face of masks without twisting it around.
Printed in PETG in 12 hours. Really good quality!
I printed a custom head scaled to my 3d scan and slightly angled, so i can easily work on the face of masks without twisting it around.
Printed in PETG in 12 hours. Really good quality!
I got a 5v old adafruit trinket bcs its smaller so it can fit in my sword but it runs out of ram and cant address more than 70 or so pixels 🫠
January 6, 2026 at 1:07 AM
I got a 5v old adafruit trinket bcs its smaller so it can fit in my sword but it runs out of ram and cant address more than 70 or so pixels 🫠
I use puffy paint to make lip gums and eyelids and more skin textures now.
Works really well, durable, and stays flexible.
Works really well, durable, and stays flexible.
January 5, 2026 at 6:57 AM
I use puffy paint to make lip gums and eyelids and more skin textures now.
Works really well, durable, and stays flexible.
Works really well, durable, and stays flexible.
Finished the tiefling tail! I ended up patching the first attempt i made bcs the second try was a fail 😔 made with creature cast rubber in a 3dprinted mold and foam inside, then airbrushed and bit of shading with a regular brush #cosplay
January 3, 2026 at 7:21 PM
Finished the tiefling tail! I ended up patching the first attempt i made bcs the second try was a fail 😔 made with creature cast rubber in a 3dprinted mold and foam inside, then airbrushed and bit of shading with a regular brush #cosplay
3dprinted shaft into a chiffon fabric feather test (Pause print halfway, add fabric, continue printing).
If you have a 3dprinter laser combo you could maybe do this in one single pass (i handcut the feather shape and burned the edges here)
If you have a 3dprinter laser combo you could maybe do this in one single pass (i handcut the feather shape and burned the edges here)
January 3, 2026 at 2:01 AM
3dprinted shaft into a chiffon fabric feather test (Pause print halfway, add fabric, continue printing).
If you have a 3dprinter laser combo you could maybe do this in one single pass (i handcut the feather shape and burned the edges here)
If you have a 3dprinter laser combo you could maybe do this in one single pass (i handcut the feather shape and burned the edges here)
sketchy idea of a fursuit design for myself using fur fabric i have (mostly whites and denim blue)
some dragon/feline/blue jay influences
some dragon/feline/blue jay influences
January 1, 2026 at 8:13 PM
sketchy idea of a fursuit design for myself using fur fabric i have (mostly whites and denim blue)
some dragon/feline/blue jay influences
some dragon/feline/blue jay influences
Ready for another tail attempt
December 29, 2025 at 7:51 PM
Ready for another tail attempt
Another good boy in the works
Lots of evolution in this construction! Dual petg and LW-PLA 3dprint for strength and weight in the perfect balance which worked really nicely. New systems for ears and eyes too and minor updates in other areas, such as a jaw stop to avoid scratching paint on the teeth.
Lots of evolution in this construction! Dual petg and LW-PLA 3dprint for strength and weight in the perfect balance which worked really nicely. New systems for ears and eyes too and minor updates in other areas, such as a jaw stop to avoid scratching paint on the teeth.
December 9, 2025 at 8:09 PM
Another good boy in the works
Lots of evolution in this construction! Dual petg and LW-PLA 3dprint for strength and weight in the perfect balance which worked really nicely. New systems for ears and eyes too and minor updates in other areas, such as a jaw stop to avoid scratching paint on the teeth.
Lots of evolution in this construction! Dual petg and LW-PLA 3dprint for strength and weight in the perfect balance which worked really nicely. New systems for ears and eyes too and minor updates in other areas, such as a jaw stop to avoid scratching paint on the teeth.
Use 3dprinter to make custom cosplay✅️
Use 3dprinter to make custom tools for more cosplay ✅️
Use 3dprinter to make custom tools for more cosplay ✅️
December 4, 2025 at 11:58 PM
Use 3dprinter to make custom cosplay✅️
Use 3dprinter to make custom tools for more cosplay ✅️
Use 3dprinter to make custom tools for more cosplay ✅️
I painted it and it looks so gooooood 🫶painting timelapse at the end
December 4, 2025 at 3:40 AM
I painted it and it looks so gooooood 🫶painting timelapse at the end
wanted to share this Karlach facepaint test bcs ive struggled for years to get a decent facepaint result for these kind of cosplays and im super happy with these results plus it was quick to apply and remove! #cosplay #facepaint #bodypaint
December 3, 2025 at 7:02 PM
wanted to share this Karlach facepaint test bcs ive struggled for years to get a decent facepaint result for these kind of cosplays and im super happy with these results plus it was quick to apply and remove! #cosplay #facepaint #bodypaint
Juicy 😂
Creature cast rubber drying in my 3dprinted karlach body mold. A little fan makes this process freaking quick ngl
Creature cast rubber drying in my 3dprinted karlach body mold. A little fan makes this process freaking quick ngl
November 30, 2025 at 1:14 AM
Juicy 😂
Creature cast rubber drying in my 3dprinted karlach body mold. A little fan makes this process freaking quick ngl
Creature cast rubber drying in my 3dprinted karlach body mold. A little fan makes this process freaking quick ngl
New favorite led strip listing for cosplay props.
These are single color (good enough for 95% of cosplay props ngl) 5v usb, thin, easy to curve/bend, and high density at 120 leds per meter instead of the default 60 L/M.
Tons of color options too
www.aliexpress.us/item/3256804...
These are single color (good enough for 95% of cosplay props ngl) 5v usb, thin, easy to curve/bend, and high density at 120 leds per meter instead of the default 60 L/M.
Tons of color options too
www.aliexpress.us/item/3256804...
November 27, 2025 at 11:54 PM
New favorite led strip listing for cosplay props.
These are single color (good enough for 95% of cosplay props ngl) 5v usb, thin, easy to curve/bend, and high density at 120 leds per meter instead of the default 60 L/M.
Tons of color options too
www.aliexpress.us/item/3256804...
These are single color (good enough for 95% of cosplay props ngl) 5v usb, thin, easy to curve/bend, and high density at 120 leds per meter instead of the default 60 L/M.
Tons of color options too
www.aliexpress.us/item/3256804...