@rhylonight.bsky.social
This HBO Cinemax jacket looks very old judging from the style, and the graphics seems to be printed both normally and mirrored!?🧐
November 28, 2025 at 1:46 PM
This HBO Cinemax jacket looks very old judging from the style, and the graphics seems to be printed both normally and mirrored!?🧐
David Lynch be like: what book?😆
November 26, 2025 at 10:14 PM
David Lynch be like: what book?😆
Made a clip-on windowsill that clips onto this sill-less window frame!
Wood recycled from a floor board, clips printed with PETG
Wood recycled from a floor board, clips printed with PETG
November 25, 2025 at 4:22 PM
Made a clip-on windowsill that clips onto this sill-less window frame!
Wood recycled from a floor board, clips printed with PETG
Wood recycled from a floor board, clips printed with PETG
Put up a shelf thingy for my brother's stuffs before I trip over them🤬
PS: kind of funny that in this photo there are 2 large kites, 3 skateboards (2 more long boards out of frame), and a set of crutches🤣 (the crutches are unrelated to skateboarding)
PS: kind of funny that in this photo there are 2 large kites, 3 skateboards (2 more long boards out of frame), and a set of crutches🤣 (the crutches are unrelated to skateboarding)
November 23, 2025 at 9:39 AM
Put up a shelf thingy for my brother's stuffs before I trip over them🤬
PS: kind of funny that in this photo there are 2 large kites, 3 skateboards (2 more long boards out of frame), and a set of crutches🤣 (the crutches are unrelated to skateboarding)
PS: kind of funny that in this photo there are 2 large kites, 3 skateboards (2 more long boards out of frame), and a set of crutches🤣 (the crutches are unrelated to skateboarding)
I made a Corsi-Rosenthal Box🙂
(8 HVAC filters and a fan attached to a box)
I bought the filters new, already own the fan, and I made the box out of old furnitures♻️
(8 HVAC filters and a fan attached to a box)
I bought the filters new, already own the fan, and I made the box out of old furnitures♻️
November 23, 2025 at 6:05 AM
I made a Corsi-Rosenthal Box🙂
(8 HVAC filters and a fan attached to a box)
I bought the filters new, already own the fan, and I made the box out of old furnitures♻️
(8 HVAC filters and a fan attached to a box)
I bought the filters new, already own the fan, and I made the box out of old furnitures♻️
I got accepted as vendor at FurryTeaParty 2026🥳
November 22, 2025 at 5:11 PM
I got accepted as vendor at FurryTeaParty 2026🥳
Made a bunch of boxes that turns into a bunk bed stair when they are stacked together. Mostly out of discarded desks♻️.
PS: Each step is within 5mm of difference, the distortion of the lens made them look wonky lol
PS: Each step is within 5mm of difference, the distortion of the lens made them look wonky lol
November 19, 2025 at 11:56 AM
Made a bunch of boxes that turns into a bunk bed stair when they are stacked together. Mostly out of discarded desks♻️.
PS: Each step is within 5mm of difference, the distortion of the lens made them look wonky lol
PS: Each step is within 5mm of difference, the distortion of the lens made them look wonky lol
This captures my vibe pretty well:
-Mint condition 2015 Macbook Pro with protective case
-Cheap tea carelessly resting on the MacBook
-Using a Makita MakPac as a table
-Using a chunk of foam leftover from making my fursuit tail as a seat cushion
-Me sitting on floor, trying to fix the router
-Mint condition 2015 Macbook Pro with protective case
-Cheap tea carelessly resting on the MacBook
-Using a Makita MakPac as a table
-Using a chunk of foam leftover from making my fursuit tail as a seat cushion
-Me sitting on floor, trying to fix the router
November 18, 2025 at 9:37 AM
This captures my vibe pretty well:
-Mint condition 2015 Macbook Pro with protective case
-Cheap tea carelessly resting on the MacBook
-Using a Makita MakPac as a table
-Using a chunk of foam leftover from making my fursuit tail as a seat cushion
-Me sitting on floor, trying to fix the router
-Mint condition 2015 Macbook Pro with protective case
-Cheap tea carelessly resting on the MacBook
-Using a Makita MakPac as a table
-Using a chunk of foam leftover from making my fursuit tail as a seat cushion
-Me sitting on floor, trying to fix the router
I made a splitter thingy (three cats) for this automatic feeder
The compound angle is surprisingly challenging to deal with💀
The compound angle is surprisingly challenging to deal with💀
November 17, 2025 at 4:12 PM
I made a splitter thingy (three cats) for this automatic feeder
The compound angle is surprisingly challenging to deal with💀
The compound angle is surprisingly challenging to deal with💀
This ant colony is trying to carry our cats' kibble into the wall🧐
It's very impressive since one single piece of kibble is about 10X of their size, imagine ten adults carrying a car with their bare hands!
It's very impressive since one single piece of kibble is about 10X of their size, imagine ten adults carrying a car with their bare hands!
November 16, 2025 at 5:47 PM
This ant colony is trying to carry our cats' kibble into the wall🧐
It's very impressive since one single piece of kibble is about 10X of their size, imagine ten adults carrying a car with their bare hands!
It's very impressive since one single piece of kibble is about 10X of their size, imagine ten adults carrying a car with their bare hands!
I still have this pic saved on my PC😆!!! So happy and proud of y'all😭
November 13, 2025 at 9:32 PM
I still have this pic saved on my PC😆!!! So happy and proud of y'all😭
November 2, 2025 at 1:57 AM
I'm feeling so clever because I can tell you used a steel ball casters for the shark eyes!😆
January 29, 2025 at 7:31 PM
I'm feeling so clever because I can tell you used a steel ball casters for the shark eyes!😆
Sewing corner ready!🧵
Brain is not ready to learn how to use the sewing machine😵💫!
Brain is not ready to learn how to use the sewing machine😵💫!
January 26, 2025 at 7:17 PM
Sewing corner ready!🧵
Brain is not ready to learn how to use the sewing machine😵💫!
Brain is not ready to learn how to use the sewing machine😵💫!
T minus 27 days till furry con😱
So far I got the fur fabrics, the polyfil cotton, the foam, the patterns for the tail and paws on hand.
Got zero progress on the head.
Will try and get a basic sewing spot set up and sew the paws or tail this weeked!💪
So far I got the fur fabrics, the polyfil cotton, the foam, the patterns for the tail and paws on hand.
Got zero progress on the head.
Will try and get a basic sewing spot set up and sew the paws or tail this weeked!💪
January 24, 2025 at 6:53 AM
T minus 27 days till furry con😱
So far I got the fur fabrics, the polyfil cotton, the foam, the patterns for the tail and paws on hand.
Got zero progress on the head.
Will try and get a basic sewing spot set up and sew the paws or tail this weeked!💪
So far I got the fur fabrics, the polyfil cotton, the foam, the patterns for the tail and paws on hand.
Got zero progress on the head.
Will try and get a basic sewing spot set up and sew the paws or tail this weeked!💪
Thanks😳!
Mamiya actually made several grips for the RB67, but it's pretty rare and pricey in the second hand market, so I decided to made one myself.
But I later found out there really isn't a need for it😆
Mamiya actually made several grips for the RB67, but it's pretty rare and pricey in the second hand market, so I decided to made one myself.
But I later found out there really isn't a need for it😆
January 23, 2025 at 1:04 PM
Thanks😳!
Mamiya actually made several grips for the RB67, but it's pretty rare and pricey in the second hand market, so I decided to made one myself.
But I later found out there really isn't a need for it😆
Mamiya actually made several grips for the RB67, but it's pretty rare and pricey in the second hand market, so I decided to made one myself.
But I later found out there really isn't a need for it😆
The camera has what's called a "waist level viewfinder", and this is how use it.
(I don't want to show my whole body, so here's some pics I found online😝)
(I don't want to show my whole body, so here's some pics I found online😝)
January 23, 2025 at 6:49 AM
The camera has what's called a "waist level viewfinder", and this is how use it.
(I don't want to show my whole body, so here's some pics I found online😝)
(I don't want to show my whole body, so here's some pics I found online😝)
Why it failed?
1. It's too heavy, and the camera is heavy enough already!🤣
2. The controls are all on your right hand, and your left hand naturally cups like camera like this when you are shooting, so there's no need for a handle. (2/2)
1. It's too heavy, and the camera is heavy enough already!🤣
2. The controls are all on your right hand, and your left hand naturally cups like camera like this when you are shooting, so there's no need for a handle. (2/2)
January 23, 2025 at 6:44 AM
Why it failed?
1. It's too heavy, and the camera is heavy enough already!🤣
2. The controls are all on your right hand, and your left hand naturally cups like camera like this when you are shooting, so there's no need for a handle. (2/2)
1. It's too heavy, and the camera is heavy enough already!🤣
2. The controls are all on your right hand, and your left hand naturally cups like camera like this when you are shooting, so there's no need for a handle. (2/2)
Here's a failed project:
I made this handle for a super heavy camera (Mamiya RB67, ~3KG).
I custom ordered a piece of bent stainless steel. I designed and 3D printed (knife) scales, and attached them on the stainless steel with Chicago screws.
(1/2)
I made this handle for a super heavy camera (Mamiya RB67, ~3KG).
I custom ordered a piece of bent stainless steel. I designed and 3D printed (knife) scales, and attached them on the stainless steel with Chicago screws.
(1/2)
January 23, 2025 at 6:28 AM
Here's a failed project:
I made this handle for a super heavy camera (Mamiya RB67, ~3KG).
I custom ordered a piece of bent stainless steel. I designed and 3D printed (knife) scales, and attached them on the stainless steel with Chicago screws.
(1/2)
I made this handle for a super heavy camera (Mamiya RB67, ~3KG).
I custom ordered a piece of bent stainless steel. I designed and 3D printed (knife) scales, and attached them on the stainless steel with Chicago screws.
(1/2)
My inkjet printer's black nozzle is clogged🙁
The price for a new nozzle is the same price of the machine, the price for a new ink cartridge is 20% of the machine.
I decided to not get it fixed and not buy a new one, I'll go to print shops from now on. At least the scanner is still functional🙃
The price for a new nozzle is the same price of the machine, the price for a new ink cartridge is 20% of the machine.
I decided to not get it fixed and not buy a new one, I'll go to print shops from now on. At least the scanner is still functional🙃
January 22, 2025 at 8:37 AM
My inkjet printer's black nozzle is clogged🙁
The price for a new nozzle is the same price of the machine, the price for a new ink cartridge is 20% of the machine.
I decided to not get it fixed and not buy a new one, I'll go to print shops from now on. At least the scanner is still functional🙃
The price for a new nozzle is the same price of the machine, the price for a new ink cartridge is 20% of the machine.
I decided to not get it fixed and not buy a new one, I'll go to print shops from now on. At least the scanner is still functional🙃
I saw this online the day after I finished modelling V1, so you buy them if you need them!
January 21, 2025 at 8:50 PM
I saw this online the day after I finished modelling V1, so you buy them if you need them!
Version 2!
I printed V1 in matte PLA, which feels terrible to touch, I think it leave a trace amount of dust on my fingers.
I printed V2 in regular PETG, I added a thin "waist" in the mid section, and it feels much better to touch!
I printed V1 in matte PLA, which feels terrible to touch, I think it leave a trace amount of dust on my fingers.
I printed V2 in regular PETG, I added a thin "waist" in the mid section, and it feels much better to touch!
January 21, 2025 at 8:10 PM
Version 2!
I printed V1 in matte PLA, which feels terrible to touch, I think it leave a trace amount of dust on my fingers.
I printed V2 in regular PETG, I added a thin "waist" in the mid section, and it feels much better to touch!
I printed V1 in matte PLA, which feels terrible to touch, I think it leave a trace amount of dust on my fingers.
I printed V2 in regular PETG, I added a thin "waist" in the mid section, and it feels much better to touch!
Me: But...she's you...
Zoey:
Zoey:
January 21, 2025 at 6:38 PM
Me: But...she's you...
Zoey:
Zoey:
I've been cleaning/decluttering/organizing my room, and I found the Olfa scalpel I used to use a lot!
However, the cap is missing, and the rubber grip is pretty shitty to begin with.
After 1 min of searching and 45min of 3D printing, I have replacement parts now! (links in ALT text)
However, the cap is missing, and the rubber grip is pretty shitty to begin with.
After 1 min of searching and 45min of 3D printing, I have replacement parts now! (links in ALT text)
January 20, 2025 at 4:09 PM
I've been cleaning/decluttering/organizing my room, and I found the Olfa scalpel I used to use a lot!
However, the cap is missing, and the rubber grip is pretty shitty to begin with.
After 1 min of searching and 45min of 3D printing, I have replacement parts now! (links in ALT text)
However, the cap is missing, and the rubber grip is pretty shitty to begin with.
After 1 min of searching and 45min of 3D printing, I have replacement parts now! (links in ALT text)
I 3D printed a small block that fits inside the groove. The block has holes that line up with the hook, and they are a tight fit for the screws.
The block is superglued in. The holes are slightly offset from the holes on the plywood, so the screws also bite into a bit of plywood.
The block is superglued in. The holes are slightly offset from the holes on the plywood, so the screws also bite into a bit of plywood.
January 19, 2025 at 9:43 PM
I 3D printed a small block that fits inside the groove. The block has holes that line up with the hook, and they are a tight fit for the screws.
The block is superglued in. The holes are slightly offset from the holes on the plywood, so the screws also bite into a bit of plywood.
The block is superglued in. The holes are slightly offset from the holes on the plywood, so the screws also bite into a bit of plywood.