Addy LeScout
@airsoftest.bsky.social
I'm a hobbyist & collector of Airsoft replicas. I also enjoy gunpla, banjos, analog media, sushi & crafting. Lowkey Furry Chick & Nerd. Replica pics by me.🏳️⚧️🏳️🌈
(All images are airsoft replicas from my personal collection. No images depict actual firearms)
(All images are airsoft replicas from my personal collection. No images depict actual firearms)
Oh no!!! I was unaware of the Groza... I've been looking at these 2. Fortunately they're not very pricey...
December 7, 2025 at 3:18 PM
Oh no!!! I was unaware of the Groza... I've been looking at these 2. Fortunately they're not very pricey...
Both are likely to come with an orange tip attached.
If the orange tip were to fall off by total accident, what would be underneath?
The SMP (left) has an internal barrel shroud, but no threading, just the gap between outer and inner barrel.
The P365 (right) is actually internally threaded.
If the orange tip were to fall off by total accident, what would be underneath?
The SMP (left) has an internal barrel shroud, but no threading, just the gap between outer and inner barrel.
The P365 (right) is actually internally threaded.
December 7, 2025 at 12:41 AM
Both are likely to come with an orange tip attached.
If the orange tip were to fall off by total accident, what would be underneath?
The SMP (left) has an internal barrel shroud, but no threading, just the gap between outer and inner barrel.
The P365 (right) is actually internally threaded.
If the orange tip were to fall off by total accident, what would be underneath?
The SMP (left) has an internal barrel shroud, but no threading, just the gap between outer and inner barrel.
The P365 (right) is actually internally threaded.
Both replicas have nearly the same profile. They're slightly larger than some ultra compacts like the Bodyguard (2nd picture).
Unlike the Bodyguard, which has a fixed slide, both the P365 & SMP are blowback.
I think it'd be fair to say the P365 would be 'partial blowback'. More on that later.
Unlike the Bodyguard, which has a fixed slide, both the P365 & SMP are blowback.
I think it'd be fair to say the P365 would be 'partial blowback'. More on that later.
December 6, 2025 at 12:05 AM
Both replicas have nearly the same profile. They're slightly larger than some ultra compacts like the Bodyguard (2nd picture).
Unlike the Bodyguard, which has a fixed slide, both the P365 & SMP are blowback.
I think it'd be fair to say the P365 would be 'partial blowback'. More on that later.
Unlike the Bodyguard, which has a fixed slide, both the P365 & SMP are blowback.
I think it'd be fair to say the P365 would be 'partial blowback'. More on that later.
Let's start with some basics.
What you're getting for the price;
The P365 + 1 mag is $99.99.
Additional 12 rnd CO2 mags are $21.95
The SMP + 1 mag runs $149.99. Additional 20 rnd Green Gas mags are $34.99.
(Prices are based off Evike/Mir/AMS, and are approximate.)
#airsoft
What you're getting for the price;
The P365 + 1 mag is $99.99.
Additional 12 rnd CO2 mags are $21.95
The SMP + 1 mag runs $149.99. Additional 20 rnd Green Gas mags are $34.99.
(Prices are based off Evike/Mir/AMS, and are approximate.)
#airsoft
December 5, 2025 at 9:45 PM
Let's start with some basics.
What you're getting for the price;
The P365 + 1 mag is $99.99.
Additional 12 rnd CO2 mags are $21.95
The SMP + 1 mag runs $149.99. Additional 20 rnd Green Gas mags are $34.99.
(Prices are based off Evike/Mir/AMS, and are approximate.)
#airsoft
What you're getting for the price;
The P365 + 1 mag is $99.99.
Additional 12 rnd CO2 mags are $21.95
The SMP + 1 mag runs $149.99. Additional 20 rnd Green Gas mags are $34.99.
(Prices are based off Evike/Mir/AMS, and are approximate.)
#airsoft
Good morning!!
I've been wanting to do a few good comparisons, and I thought these would be a good place to start!
We're comparing 2 replicas. The Sig Air Proforce P365 (co2, top replica), and the EMG Strike Industries SMP (green gas, bottom replica).
I've been wanting to do a few good comparisons, and I thought these would be a good place to start!
We're comparing 2 replicas. The Sig Air Proforce P365 (co2, top replica), and the EMG Strike Industries SMP (green gas, bottom replica).
December 5, 2025 at 3:29 PM
Good morning!!
I've been wanting to do a few good comparisons, and I thought these would be a good place to start!
We're comparing 2 replicas. The Sig Air Proforce P365 (co2, top replica), and the EMG Strike Industries SMP (green gas, bottom replica).
I've been wanting to do a few good comparisons, and I thought these would be a good place to start!
We're comparing 2 replicas. The Sig Air Proforce P365 (co2, top replica), and the EMG Strike Industries SMP (green gas, bottom replica).
December 5, 2025 at 4:17 AM
Up next, a Mini Pistol comparison!
December 3, 2025 at 2:26 PM
Up next, a Mini Pistol comparison!
This is so cool, I have mine set up very similar!
November 20, 2025 at 2:12 AM
This is so cool, I have mine set up very similar!
Here's the Warq Full Cover helmet carry case! I'm impressed with the quality.
Early on, I wanted full-face coverage for cqb. I was a scaredycat and didn't like most helmet/goggle/facemask combos I'd seen. I've had this over 4 years now and I love it. Great helmet, great case! #airsoft
Early on, I wanted full-face coverage for cqb. I was a scaredycat and didn't like most helmet/goggle/facemask combos I'd seen. I've had this over 4 years now and I love it. Great helmet, great case! #airsoft
November 19, 2025 at 6:48 PM
Here's the Warq Full Cover helmet carry case! I'm impressed with the quality.
Early on, I wanted full-face coverage for cqb. I was a scaredycat and didn't like most helmet/goggle/facemask combos I'd seen. I've had this over 4 years now and I love it. Great helmet, great case! #airsoft
Early on, I wanted full-face coverage for cqb. I was a scaredycat and didn't like most helmet/goggle/facemask combos I'd seen. I've had this over 4 years now and I love it. Great helmet, great case! #airsoft
Ooo, the new case is lovely. I'll get some pics up in a bit. My WARQ helmet is easily my favorite helmet and it deserves a cozy home. 😌
November 19, 2025 at 2:58 PM
Ooo, the new case is lovely. I'll get some pics up in a bit. My WARQ helmet is easily my favorite helmet and it deserves a cozy home. 😌
This is my Umarex Elite Force Walter PPQ gas blowback replica. Metal slide and barrel, nylon reinforced polymer frame. For as long as I've had this, it hasn't had much field time, but I love the feel of it. Solid, snappy, hits around 270-280 fps with .25g pellets, fairly accurate. #anairsoftaday
November 18, 2025 at 5:15 PM
This is my Umarex Elite Force Walter PPQ gas blowback replica. Metal slide and barrel, nylon reinforced polymer frame. For as long as I've had this, it hasn't had much field time, but I love the feel of it. Solid, snappy, hits around 270-280 fps with .25g pellets, fairly accurate. #anairsoftaday
Next up! Little bit of a throwback in my collection...#airsoft
November 17, 2025 at 6:30 PM
Next up! Little bit of a throwback in my collection...#airsoft
It's finally sweater weather! That means, in about a week, it'll be parka weather and I'll be grouchy.
November 13, 2025 at 4:57 PM
It's finally sweater weather! That means, in about a week, it'll be parka weather and I'll be grouchy.
Posted this pretty replica to a chat only to receive a 10 minute dissertation in reply about how a Mateba wouldn't work well with a supressor. 😂
October 27, 2025 at 7:22 PM
Posted this pretty replica to a chat only to receive a 10 minute dissertation in reply about how a Mateba wouldn't work well with a supressor. 😂
This is my Archon Type B. Aluminum slide, polymer grip, green gas replica.
Crazy smooth/snappy slide, out-of-box.
One of the worst mag releases I've had.
Perhaps mine is defective, it's prevented me from really fielding it. Feels great in-hand, though. Anyone else experience this? #anairsoftaday
Crazy smooth/snappy slide, out-of-box.
One of the worst mag releases I've had.
Perhaps mine is defective, it's prevented me from really fielding it. Feels great in-hand, though. Anyone else experience this? #anairsoftaday
October 21, 2025 at 2:25 PM
This is my Archon Type B. Aluminum slide, polymer grip, green gas replica.
Crazy smooth/snappy slide, out-of-box.
One of the worst mag releases I've had.
Perhaps mine is defective, it's prevented me from really fielding it. Feels great in-hand, though. Anyone else experience this? #anairsoftaday
Crazy smooth/snappy slide, out-of-box.
One of the worst mag releases I've had.
Perhaps mine is defective, it's prevented me from really fielding it. Feels great in-hand, though. Anyone else experience this? #anairsoftaday
This is my KWA Kriss Vector, gbb (HPA tapped), polymer/steel combo.
I wasn't aware of a few things when I first got this pretty thang.
- Vectors are far bigger than I thought
- This is more rare that I thought
- I paid way too little for it
It's very fun. Also heavy. Burst fire.
#anairsoftaday
I wasn't aware of a few things when I first got this pretty thang.
- Vectors are far bigger than I thought
- This is more rare that I thought
- I paid way too little for it
It's very fun. Also heavy. Burst fire.
#anairsoftaday
October 6, 2025 at 3:13 AM
This is my KWA Kriss Vector, gbb (HPA tapped), polymer/steel combo.
I wasn't aware of a few things when I first got this pretty thang.
- Vectors are far bigger than I thought
- This is more rare that I thought
- I paid way too little for it
It's very fun. Also heavy. Burst fire.
#anairsoftaday
I wasn't aware of a few things when I first got this pretty thang.
- Vectors are far bigger than I thought
- This is more rare that I thought
- I paid way too little for it
It's very fun. Also heavy. Burst fire.
#anairsoftaday
Up next, something of a classic? I think?
October 5, 2025 at 1:02 AM
Up next, something of a classic? I think?
I fell in love with the Vulture and decided I needed a second one. They were such good replicas for me, so I felt they deserved some pretty skellie grips.
October 3, 2025 at 1:16 AM
I fell in love with the Vulture and decided I needed a second one. They were such good replicas for me, so I felt they deserved some pretty skellie grips.
Base model is an ICS BLE Vulture, one of my most used and favorites of my semi-auto pistols.
October 3, 2025 at 1:14 AM
Base model is an ICS BLE Vulture, one of my most used and favorites of my semi-auto pistols.
Family Photo! (ECHO1, FTC, and S&T)
October 2, 2025 at 12:30 AM
Family Photo! (ECHO1, FTC, and S&T)
Cybergun P90 - AEG, Polymer with aluminum components, custom slingpoint, trigger, quick-release mag mod, and a Zaku drum mag.
These are fun replicas, with fairly lousy triggers, and a bit of a hollow feel, along with some room for improvement but I'll always love em. #anairsoftaday
These are fun replicas, with fairly lousy triggers, and a bit of a hollow feel, along with some room for improvement but I'll always love em. #anairsoftaday
October 1, 2025 at 9:05 PM
Cybergun P90 - AEG, Polymer with aluminum components, custom slingpoint, trigger, quick-release mag mod, and a Zaku drum mag.
These are fun replicas, with fairly lousy triggers, and a bit of a hollow feel, along with some room for improvement but I'll always love em. #anairsoftaday
These are fun replicas, with fairly lousy triggers, and a bit of a hollow feel, along with some room for improvement but I'll always love em. #anairsoftaday
"The weight...is sign of reliability"
September 30, 2025 at 8:51 PM
"The weight...is sign of reliability"
This is 'Brute'.
My ARES 2" Revolver with CL Project Design top rail.
Full metal, electroplated, real wood grip, Co2 replica. I love this thing.
It's heavy, it's shiny, it's very accurate and the shells are beautiful. One of the nicest hammer/trigger feels of all my revolvers. #anairsoftaday
My ARES 2" Revolver with CL Project Design top rail.
Full metal, electroplated, real wood grip, Co2 replica. I love this thing.
It's heavy, it's shiny, it's very accurate and the shells are beautiful. One of the nicest hammer/trigger feels of all my revolvers. #anairsoftaday
September 30, 2025 at 8:32 PM
This is 'Brute'.
My ARES 2" Revolver with CL Project Design top rail.
Full metal, electroplated, real wood grip, Co2 replica. I love this thing.
It's heavy, it's shiny, it's very accurate and the shells are beautiful. One of the nicest hammer/trigger feels of all my revolvers. #anairsoftaday
My ARES 2" Revolver with CL Project Design top rail.
Full metal, electroplated, real wood grip, Co2 replica. I love this thing.
It's heavy, it's shiny, it's very accurate and the shells are beautiful. One of the nicest hammer/trigger feels of all my revolvers. #anairsoftaday